btl full loaded 15 displacement

[ripper 0]

does anybody know the displacment on a fully loaded BTL 15? Thanks

Dustin

[ripper 0]

sdjflksjdfkljdsklfdsjfk;ldsjf

[NDMstang65 403]

Not that critical man..and it's right on the website...

BTL15

DUAL 1 | DUAL 2

Fs: 36.7 Hz | 36.1 Hz

Re: 0.7 Ohms/coil | 1.5 Ohms/coil

Qms: 5.62 | 5.71

Qes: .25 | .23

Qts: .24 | .23

Mms: 241g | 249g

Cms: 0.78mm/N | 0.78mm/N

Sd: 810cm^2 | 810cm^2

Vas: 71.7 l | 71.7 l

Spl: 93.3dB 1W/1m | 93.4dB 1W/1m

Bl: 17.5 N/A | 26.9 N/A

Xmax: 16mm * | 16mm *

Rms: 2000W * | 2000W *

Sealed box: N/A cuft | N/A cuft

Ported box: 3-5cuft | 3-5cuft

Sub OD: 15.625

[Fi Car Audio 64]

Fully loaded is 1" deeper than above with the extra magnet and I believe dispacement goes up to .24 cuft.

[ripper 0]

Fully loaded is 1" deeper than above with the extra magnet and I believe dispacement goes up to .24 cuft.

Thanks for the INFO.

And as far as the post above the one from FI, Im very aware the one WITHOUT the third magnet is on the website, but as I said, I wanted to know what the fully loaded btl displacment was.

Thanks again

Dustin