Box help.

[pinkfloydms 0]

I am needing box plans for a FI.Q 12. I know I could probably go out and buy one, but I would rather build it myself.

I am planning on making 1.3 cubes like recomended as optimal. I don't want just a square box though. I would like it to be 4 sided with a little slope in the front. I'm sure you know what I am talking about, I hope. Anyway if you could tell me the size height, depth1(bottom), depth2(top), width, and angle that the slopes on the front usually are, I would appreciate it very much.

[pinkfloydms 0]

Or may be a website I can look at to get them off of. Thanks again.

[Fi Car Audio 64]

We can design one based on what will fit in your vehicle dimension wise... but just about any random size or shape with that volume will work fine for sealed. There is no standard slope for prefabs or other enclosures... anything that fits works fine.

Thanks,

Scott

[pinkfloydms 0]

We can design one based on what will fit in your vehicle dimension wise... but just about any random size or shape with that volume will work fine for sealed. There is no standard slope for prefabs or other enclosures... anything that fits works fine.

Thanks,

Scott

Ok I guess I'll just play with it to make it look good. What depth do you recomend to make it?

[tejcurrent 13]

The most important thing is that you can do the math to get the right space after displacement, not the actual shape of the box. I'd make it a little longer than the woofer mounting depth (or roughly 8 inches minimum). As long as you know how to get the area of a trapazoid you're good

Good luck

Edited June 11, 2007 by tejcurrent

[pinkfloydms 0]

Yeah I remember how from math. Just divide into a square and a triangle and get the volume of each.

[pinkfloydms 0]

How does this look guys? Would you have any suggestions for me?

It is 1.23cf.

[Fi Car Audio 64]

Looks good to me. Should work fine.

Thanks,

Scott