I need recones!

[nimbyfaygo 0]

I'm looking to recone two LA storm X1 10's. I want to use 12's instead. So what I need is two 12in baskets, and two recone assemblies that fit in the 3HP gap.

I haven't been able to find out anything about the gap, other than its a 3in coil. But I saw at CA that you guys reconed a 3HP neo.

What series coil fits? Thats the question. As it is right now, I have a Fosgate 1000D on each sub, so dual 1.4 or 2ohm coils would be what I want.

I can say that they will be going in a 5cu ported box. (thats the largest I can fit in my car.) And I'll be using them for daily.

[NDMstang65 403]

IIRC The motors have to be machined to fit the baskets...so you'd have to send them in to get it done.

[Lord Baccus 1]

try my friend "John Pierce"

http://profile.myspace.com/index.cfm?fusea...e6-ded3e3bda6a1

he builds custom subs and might have a solution for you

go to this page and click "recone"

[nimbyfaygo 0]

IIRC The motors have to be machined to fit the baskets...so you'd have to send them in to get it done.

My brother in law owns a machine shop. I'm pretty sure that he can do any machining that needs to be done. All I need is a basket and soft parts.

Edited June 4, 2007 by nimbyfaygo

[Lord Baccus 1]

IIRC The motors have to be machined to fit the baskets...so you'd have to send them in to get it done.

My brother in law owns a machine shop. All I need is a basket and soft parts.

cantact PaP ask for john he has everything your looking for....

http://pierceaudioproducts.com/forum/index.php

[nimbyfaygo 0]

IIRC The motors have to be machined to fit the baskets...so you'd have to send them in to get it done.

My brother in law owns a machine shop. All I need is a basket and soft parts.

cantact PaP ask for john he has everything your looking for....

http://pierceaudioproducts.com/forum/index.php

I sent them a message. Real good people over there!

[Fi Car Audio 64]

You just simply need to drill and tap 6 holes on a 5" diameter and the standard baskets will bolt right up. From there there are a dozen different coils that we have that fit. They can be tweaked for SQ or SPL or just about anything in between.

Thanks,

Scott