2002 Caddy on bagz...8 Fi BTL 18's, 2 RF T15k amps (new vid pg 31)

[Aaron Clinton 2,372]

I don't want to see the bill when this is done.

[mccleery3 166]

Looks MUCH better without the spinners and a fresh bath!!.....Nice work Meade, lookin' foward to seeing the finished product.

[XaznKewLguyX 0]

looks like an insane install

Edited November 22, 2007 by XaznKewLguyX

[darkhart 0]

Never read a 24 page trend before so Steve all I can say is "Simply Incredible" awsome job........Rick

[mrray13 30]

i didn't read the whole thing, when was the second 15kw added?? that is one sick and pimp install

wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

[meade916 0]

ok one of the things i took care of was i mounted the powermaster intellicharger up permanently to the system. I did this because i know there will be days where the Hoopty will be sitting in the garage chillen not being shown off. While that is happening all he has to do now is open the gas cap, plug it in and this thing will charge and maintain the battery bank indefinitly.......until he is ready to take it out and show it off again. Its not a "power supply", the alts will take care of that, but meant to keep the batteries maintained and in tip top shape in between play time.

[meade916 0]

[meade916 0]

decided to start the door panels......this is all trial and error here, i THINK this is one of my options...anyway i got thru 1 6 1/2" trim ring and halfway thru one of the 10" trim rings before i had my accident with the router tonite.......

[meade916 0]

thats it for tonite my buzz is kickin in and its hard 2 type

[BKOLFO4 29]

Man dude!! Hope the finger gets better fast!!!

[rastaman 0]

Sucks about the finger, at least you still have it. You should close all the doors and send in the pic of hoopty plugged in to Greenpeace and say you made a hybrid 'lade.

[mrray13 30]

weak, i removed a part of my finger with a flush bit and just a piece of gauze and some tape later i was back to work, lol. ask james herren over at termpro (gameoverstreeta) he witnessed the whole thing, and got quite a laugh.

anyway, your not worried about fumes and possible spark from plugging in/unplugging the charger?

pretty pimp install, you have skills bro!

wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

Edited November 25, 2007 by mrray13
really bad spelling, worse then usual

[mjmarovi 8]

lol, yeh that could be bad, but as long as gas cap is on while plugged in. and if charger is off before plugging it in. exactly what all are you putting on those doors? 6 6 1/2's and a 10 for mid-bass? lol absolutely insane, i don't see this being a vehicle you can even drive with the system halfway up. or sit in with it cranking at all.

[meade916 0]

ok i have been takin it easy the last week and i also spent my saturday helping my brother with his alternator issues.......so today i made a little progress. As i said, fromt he 14th thru the 2nd i am off so i should be able to get much more done........

[meade916 0]

[meade916 0]

Started the doors......design is subject to change (just in case something goes horribly wrong ) Its what im thinkin so far though....

[meade916 0]

Well its all or nothin now hahah, let the carnage begin!

[johnecon2001 82]

woah.. I'd say overkill, but I know what's in the back.

You're gonna have a helluva a time crossing that over.

[Aaron Clinton 2,372]

wow

[mrray13 30]

wow

x2 eleventybillion!!

wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

[buickid 0]

wow

x2 eleventybillion!!

x3^2

Man, you've gotta bring that thing to Hawaii for a demo. On second though, perhaps not, you may trigger a volcanic eruption.

[meade916 0]

thanks :D

ok two things, i just bought a Alpine DVA-9965 to help with the front end duties along with the sick carputer system with 10.2" touchscreen monitor ill be molding into the dash...

the other thing is the air ride stuff i ordered also came in

Now if anyone thinks this job is taking too long dont forget this is all one person, the work keeps piling up but its still just one person doin it. Thats what i was thinkin when i seen all these wires, damn, more sh#t to do......why do i suggest to him that i do stuff like this when i know i gotta do the damn work

here is the link to see the actual product and what it does... http://www.ridetech.com/productinfo/levelpro.asp

when im done, if i can do it right, he should have 3 presets and when he gets in the car it will level itself perfectly for driving......also the other presets can be whereever he wants them. He will also be able to keep the gangsta' caddy switchbox (that he loves) and the remote controlled "airbox" joystick as well. So it will be automatic AND manual, whatever he feels that day..

[Tmax98 3]

wow

understatement

[Big Shot 0]

When you get a chance, lol, can you post a link to the carputer you got. Thanks!

[meade916 0]

its being built right now but check it out, i got everything from www.customcarputers.com rick the owner is a HELUVA guy so check it out! If u buy somethin tell him you saw it here first Ill have pics of the new setup when it gets here..