18" BL in a trunk

[mikey060 0]

hey guys, im a noobie to this forum. a lot of you probably recognize my sign name/this build. here are all the pics as of now.

well i have got all the wood cut other than the top and the inner port wall. other than that everything is going well. i am waiting for my 1" baffle for the sub to dry..then i can work on the mounting system for the sub(you'll see). here are some pics

me screwing sub to 1" baffle.

the perdy sub in the baffle. the gap was fixed btw

floor piece done. the toughest part as of yet

a view from inside the car

my bud holding it in place

the half inch bolts to mount the sub into the box

bolts through the 1.75" thick baffle

ass shot

side profile

right frotn piece

attached to sub baffle

all together now

[mikey060 0]

oh, i just took this...you guys should like this one...

btw, i bought my amp from SS Steve, from British Columbia..which is where i got the sticker

[Godsmack 361]

Nice log so far man!!!!

Keep it goin!!!

J

[///M5 2,833]

Looking good so far.

[Aaron Clinton 2,372]

Nice job on the sticker and the enslcoure.

[mikey060 0]

thanks guys. i will continue working on it today in 3 hours after school

here is a 3D rendering of what it will look like when complete. its 6.4 after port/sub displacement and is tuned to 35 hz with 93^2" of port....however i may drop the tuning a little lower. we'll see...

[mikey060 0]

dry fit out of the car

you cam see that its about an inch off..but its no biggy(top left)

floor done

covered to reduce rattles

so close to the top...yea i had to use the 1/2" to make it work

all mocked up

glued and screwed

and caulked

[djjdnap 78]

updates?

[Mark LaFountain 1,054]

wow, your really pooring your time into this, tons of cuts, looks soooo easy from your pics, lol