Can i use a massive 3000.1 and wats teh magnet do

[ha1rballx50 0]

Im interested in buyign 2 btl 12" subs

i want to no wat the 3rd magnet does

also if i could use a massive 3000.1 to run them both?

[theabunai 3]

http://www.soundsolutionsaudio.com/forum/i...?showtopic=8406

that should answer your Power handling question...

as for the third magnet

This simply adds more clearance in use for the HiXmCoil. If you intend on using the sub for an SPL application Fi suggest that you get the 3rd slug with No cooling options and only the pole chamfer.

[ha1rballx50 0]

im gonan be driving around everyday

so wat optiosn do u think i should add to it

[theabunai 3]

If i were to get a daily driver BTL i would probably get this

at the very least the P Chamfer

I would suggest the cooling though if you can afford the extra cash (This package comes with the P Chamfer)

I would also get the

HiXmCoil if you plan on beating these babies daily..

Just my personal preference

[Silverbane 0]

If i were to get a daily driver BTL i would probably get this

at the very least the P Chamfer

I would suggest the cooling though if you can afford the extra cash (This package comes with the P Chamfer)

I would also get the

HiXmCoil if you plan on beating these babies daily..

Just my personal preference

I would recommend you look at the BL rather then the BTL with only 1500 watts per sub. You will be much more satisfied with your cash. Get 2 BL's with cooling and flatwind coil and you should be golden!

[scottxgtr 9]

so wat optiosn do u think i should add to it

spellcheck. thats a good option.

i second the BLs. if not, basic btls should do.

[ha1rballx50 0]

so you think the bl's are better than a btl for me

i had two massive 12" dmx's

im lookin for louder than that