Well.... since i can't get a mag...

[flakko 1]

maybe a FI q? i already have the box for the mag 2 cubes tuned to 32 hz with 30 sq inches of port (2.5x12), and when i found out no more 12's i was very sad.

will it do okay with 30" of port? like no port noise? cuz i dont like port noise.

[Fi Car Audio 64]

Should be good with 30sqin of port. We recommend 12 - 16 sqin per cuft.

I think youll be able to limp along with a Q for a while

Thanks...

Scott

[flakko 1]

cool! thanks for the info scott,

ahm one more thing. for the power handling, how efficient are these things? cuz like i was hoping to run around 7-800w (around the same if not a little more than im running for my RL-p. my lectrical system wont allow above 1kw or it will be seriously killing my voltage.

[Fi Car Audio 64]

Not the most efficient driver out there, but I have said for years that the efficiency number has little to do with bottom octave performance. They are less efficient than a BTL, but will have more bottom end per Watt (up until there mechanical limits).

They will need a good break in preiod before they settle into specs and really start to shine SQ wise. Or with only 700-800W, I can use 2 soft spiders to get a wee bit more out of them and to be a little more stable suspension wise overall.

Thanks,

Scott

[BryanTheCEO 59]

With "only" 800w of power? That's all I'm giving my Q's and they hit and sound awsome....mmm more power..MORE POWER!!!!!! Where's my MD3 Flakko?

[flakko 1]

scott, i might take you up on that deal....it would be cool to have a RL-p + Q + SE comparison. sent you pm

ghostface i too sent you a pm.

edit: nvm scott inbox was full, i sent you an email

[flakko 1]

holy crap that was a quick response o_O