mtx 9500 help

[BigBang 0]

i just moved my 2 mtx 9500 into a 05 sentra spec V... i have the 1000 watt rms mtx amp on it at 2 oms, and a 6 farad power accoustic power cap... when i start to pound them after then get so loud, they dont distourt but they just wont get any louder do yall think i should get a second amp to help push these things? The amp is a mono block, but has dual outputs... wouldnt that make it 500 watts rms coming out of each output? i imagine they can get alot louder if i did. and also, even with that 6 farad cap, im still diming out my lights but the digital readout on the cap is saying the battery is still putting out a lil over 12 volts... any ideas?

[ngsm13 1]

What amplifier do you have, exact model?

What is the VoiceCoil config of the speakers?

nG

[BigBang 0]

the amp is a thunder 81001, and the subs are set up for 2 ohms

[BigBang 0]

the amp is a thunder 81001, and the subs are set up for 2 ohms

i also need to work on heat issues for the amp in the trunk, and rattling problems.... i have a dynomat extream trunk kit in there but it isnt enough i guess.... any ideas on the spoiler?

if i leave the rear seats down wouldnt that help both the heat problem, and give a better escape for the pressure causing the rattles?

[Tirefryr 1,742]

Sounds like you're running into power compression. At this point, the amp is doing nothing but creating more heat. If you want it louder, you'll need more power, or a different enclosure/alignment.

[BigBang 0]

Sounds like you're running into power compression. At this point, the amp is doing nothing but creating more heat. If you want it louder, you'll need more power, or a different enclosure/alignment.

more power as in...more power to the amp? or get a second amp?

[Tirefryr 1,742]

Second amp, more powerful amp, etc. . .

[BigBang 0]

Any ideas on how to stop the dimming lights? and how to stop the trunk rattle? like i said, i have a 6 farad power acoustic power cap, and a dynomat extream trunk kit in