15" Xcon box help (ported)

[Shogen 325]

Looking for some help with an enclosure for a 15" xcon... I could go sealed but I need the help of you gurus to figure out how to get it ported

Currently I have the Xcon in an enclosure that is roughly:  32" w x 17" h x 15" deep ... 

I have a 2016 Mazda3 hatch. My max dimensions for depth is 19.5" but that's only keeping a flat wall, I'm wondering what can be done about having the enclosure sort of follow the back of seats at the present angle.

Like so but less aggressive of an angle obviously...: 

So my hopes for the enclosure are:

1. Ported - 6" PSP port

2. Max dimesnions would be   W-26"   H-20"   D1(top side)-19"   D2(bottom side)- about 22"

3. frequency would be lowest I can get with a 6" port 

Specs for the Xcon:

 

 

 

Photos of hatch space:

[StreetLegal 119]

4 cuft @ 30.5 Hz

w=24.75

h= 19

d1 (top side)= 19

d2 (bottom side)= 22

port length = 17'' flair to flair , (full length of 6'' psp port).

sub up, port to side, add extra baffle on the top

 

Edited May 4, 2017 by StreetLegal

[Shogen 325]

How did this just happen? Why does my math suck? And thank you ...

2 hours ago, StreetLegal said:

4 cuft @ 30.5 Hz

w=24.75

h= 19

d1 (top side)= 19

d2 (bottom side)= 22

port length = 17'' flair to flair , (full length of 6'' psp port).

sub up, port to side, add extra baffle on the top

 

 

[StreetLegal 119]

Haha no problem mann,  have some time to kill lol   if I left out any dimension let me know.

[StreetLegal 119]

Port can go on either side.

[Shogen 325]

Thanks again... Thinking I'll be going port to driver side.... 

1 hour ago, StreetLegal said:

Port can go on either side.

 

[Shogen 325]

Although If I just make it flat and a little less deep, I can flip it to either side...