Jl 500/1 with coponents

[bweber721 0]

would it be possibile to run my jl 500/1 to 4 coponents and a set of tweeters. i would have to turn down the gains ,but would it be a good or a bad idea to even try somthing like that.

[Eldorado 0]

bad

[Aaron Clinton 2,372]

that is a mono amplifer and it is not a good idea to use it for a stereo application

[bweber721 0]

What is so bad about doing it. i would like to know for my own knowledge.

[MuddinXJ 0]

mono amplifiers are designed for subwoofer applications. I would use a class A/B amplifier for your needs.

[topgun 262]

A mono only has one channel, and if you did that, you would completely get rid of the left and right side difference.

[Adrian_D 520]

if you don't care about stereo sound do it. also, if the 500/1 is a class d, you probably won't hear anything above 500hz. i would be an ideal front stage...

[CBFryman 2]

I highly doubt the 500/1's class D circutry is capeable of producing anything over 500Hz with any sort of decently low THD or dampening factor.

[dopey 0]

You wouldnt get the high sounds...the tweets would be VERY quiet.

You wouldn't get a stereo sound...the sound would seem to come from a small space in the center of the dash.

It's a good thought...but SERIOUSLY would NOT work out in the real world.

look to a 450/4 for highpower for mids and highs.