Mach 5 15"

[UNIT 6639 0]

I thought I read some where that Mark was going to have a 15" sub available in the future.

If this is true, will it be DVC 4 ohm or will it be SVC 4 ohm? Whats the RMS going to be for it?

[mrogowski 6]

I thought I read some where that Mark was going to have a 15" sub available in the future.

If this is true, will it be DVC 4 ohm or will it be SVC 4 ohm? Whats the RMS going to be for it?

<{POST_SNAPBACK}>

Hi Unit,

You're right, there will be a 15" coming. Its a finish to the MAW line so it will be a dual 4 Ohm (nominal) vc and 500 watts RMS power handling.

Here are the specs (from the manufacturer):

MAW-15

Fs = 24.6Hz

Re = 4 Ohm (both coils connected in series)

Qms = 5.06

Qes = 0.35

Qts = 0.33

Rms = 7.2kg/s

Cms = 0.18mm/N

Mms = 236.7gr

Bl = 20.4

SPL = 90.9

VAS = 190L

Le = 2.41mH

Xmax = 13mm

These may vary a bit as I take my own measurements when I receive the order. I select a few units randomly, exercise the suspension and test them before posting the final numbers on the site.

Best regards,

Mark

[UNIT 6639 0]

I thought I read some where that Mark was going to have a 15" sub available in the future.

If this is true, will it be DVC 4 ohm or will it be SVC 4 ohm? Whats the RMS going to be for it?

<{POST_SNAPBACK}>

Hi Unit,

You're right, there will be a 15" coming. Its a finish to the MAW line so it will be a dual 4 Ohm (nominal) vc and 500 watts RMS power handling.

Here are the specs (from the manufacturer):

MAW-15

Fs = 24.6Hz

Re = 4 Ohm (both coils connected in series)

Qms = 5.06

Qes = 0.35

Qts = 0.33

Rms = 7.2kg/s

Cms = 0.18mm/N

Mms = 236.7gr

Bl = 20.4

SPL = 90.9

VAS = 190L

Le = 2.41mH

Xmax = 13mm

These may vary a bit as I take my own measurements when I receive the order. I select a few units randomly, exercise the suspension and test them before posting the final numbers on the site.

Best regards,

Mark

<{POST_SNAPBACK}>

Thanks Mark, I cant wait until you get them in stock.

[Aaron Clinton 2,372]

any update on the 15?

[mrogowski 6]

Hi Denim,

Nothing yet. I have a pre-order in with the OEM but the rep I deal with is away. Will keep you posted tho...

Best,

Mark

[Aaron Clinton 2,372]

I ask because the 15 could be a big time mover for you. Many people shy away from 18s and want larger than a 12.

[Splchaser 0]

I ask because the 15 could be a big time mover for you.  Many people shy away from 18s and want larger than a 12.

<{POST_SNAPBACK}>

I wouldnt mind cheching out a pair of these

[mrogowski 6]

Hey! You stole my avatar!

I hereby condemn you to listen to Bose speakers at 125db for 24 hours!

That'll teach ya!

Mark

[Splchaser 0]

Hey!  You stole my avatar!

I hereby condemn you to listen to Bose speakers at 125db for 24 hours!

That'll teach ya! 

Mark

<{POST_SNAPBACK}>

Sweet

[80INCHES 0]

dont know 2 much about mach5 products but that 15 looks like it has potential

80

[UNIT 6639 0]

When you say 4 ohm nominal, this means the coils are dual 4 ohm right

[mrogowski 6]

4 Ohms nominal refers to the driver having a 4 Ohm impedance across most of its operating range. This is different from DC resistance which can measure anywhere from 1.8 to 3.5 Ohms.

Hope this helps.

Mark

[Adrian_D 520]

When you say 4 ohm nominal, this means the coils are dual 4 ohm right

the sub is a d4 version. and the Re is the dc resistance, measured here with the coils in series.

[UNIT 6639 0]

Mark, will we be able to send in a deposit like with the 18? I would love to have a 15" or 2 paid for before or by the time you get them.

Or at least have a pair reserved, I have a feeling your subs are going to blow up and I mean that in a good way!

[Aaron Clinton 2,372]

in appearance are they going to look similar to the 12's?