MD2 Output Terminals?

[CBFryman 2]

What's the bigges guage I can shove into the MD2's outputs with out having to trim the wires?

I gotta know when I go buy power...err speaker wire.

[flakko 1]

lol any bigger than 10 gauge is overkill unless youre crazy

[Rc 415 0]

I had 8 guage in mine, it fit perfectly.

[Hayabusa 0]

I think 4 guage... I had to trim the 0 gauge i'm running of course...

[CBFryman 2]

Output mang .

I think ill see if the 8ga power wire i have laying around will fit. If it does Im gonna go pick up some 8ga wire from lowes. Cheap and effective.

I hope the terminals on the speaker I'm getting will accept 8ga.

[Eldorado 0]

1/0 in

8ga out

The remote is 12ga i believe

[ANeonRider 3]

I think 4 guage... I had to trim the 0 gauge i'm running of course...

<{POST_SNAPBACK}>

A big no-no in my books.

Use a reducer.

[Eldorado 0]

If you use KnuKonceptz Kolossus 1/0 you have to trim it. It doesnt even fit in a reducer.

[Hayabusa 0]

Nothing wrong with trimming wire 0 guage is more than enough as is unless u will be running a consistent 3000 watts which most don't...