Burb build. 6- xfire 18s 6-ampere audio 3800s quad singer hair pins

[Kylar96 132]

Joint venture with my buddy Kenny Capner. Pics may get fubard from start to now. Thanks for looking.

 

 

 

 

[Kylar96 132]

doors and pillars first fire up..... xfire comp sets....

 

 

[Kylar96 132]

started to learn what songs/freqs it likes...... and we couldnt be happier.

 

[Billy Jack 145]

Holy crap that's some banging. Nice. 

[Kylar96 132]

24 minutes ago, Billy Jack said:

Holy crap that's some banging. Nice. 

Thank you. A lot of work, time in this pig. We ripped the trans tunnel in 4 places, and the pass side floor had a 10" rip in it. That was taken care of via more metal and welding last week.

 

First show, 3x up north, with no testing yeilded a 159.5 legal, sealed up on the dash on db drag (burp) and also a 158.4 on bass race, which is a 30 second average on music

All sealed up on the dash, at 41hz. This last weekend was another 3x event, and put up a 160.1 on burpy, and a 159.4 on the music average run. Keep in mind, we only have 3 d7500's and one 3100 for battery, ..... yup, at 12 volt   Its just gonna go up for sure. Still havent even played with the vent/loading wall in any way. Super stoked how its turning out. 

[Billy Jack 145]

That's awesome. Yea I had the same problem in my neon with the trunk getting ripped off, and that was just barely over 150db on music. We welded that trunk back 5 different times, and it just kept ripping right around the welds. Like the welds held, but it would just rip new sheet metal on the outer edge of the welds. Luckily one side held or the trunk lid would have flew off.   My subs where ok, but my amps where badass, modified US2000x's, I have no idea how much they put out, but it had to be a ton. I bought them used from a guy who was sponsored by US amps, and they came out of a comp vehicle. They had been refurbished, and modded, by US amps. I ended up blowing both my 15" inch death penalty's like nothing. I got happy with the nobs one day, and I smelled the coils and turned it down, but they where already done. Next time I tried to play them they where locked up tight. And that was just 15-20 seconds of music. 

Edited June 26, 2016 by Billy Jack

[Kylar96 132]

On 6/25/2016 at 4:55 PM, Billy Jack said:

Holy crap that's some banging. Nice. 

Thank you. A lot of work, time in this pig. We ripped the trans tunnel in 4 places, and the pass side floor had a 10" rip in it. That was taken care of via more metal and welding last week.

 

First show, 3x up north, with no testing yeilded a 159.5 legal, sealed up on the dash on db drag (burp) and also a 158.4 on bass race, which is a 30 second average on music

All sealed up on the dash, at 41hz. This last weekend was another 3x event, and put up a 160.1 on burpy, and a 159.4 on the music average run. Keep in mind, we only have 3 d7500's and one 3100 for battery, ..... yup, at 12 volt   Its just gonna go up for sure. Still havent even played with the vent/loading wall in any way. Super stoked how its turning out. 

[Notorious97200 339]

Nice score, nice build!

Do you have more pics of the car, the install ?

 

[Notorious97200 339]

Nice score, nice build!

Do you have more pics of the car, the install ?

 

[Kylar96 132]

On 6/25/2016 at 4:55 PM, Billy Jack said:

Holy crap that's some banging. Nice. 

Dude, i could probably crash this site with the amount of pics and vids i have of this. We done nothing but test, redo, test, fail, succeed, fail, test, and on. But, we havent touched teh vent since we shrunk it, and beefed it up. That, that will come kinda last, when we are comfy cozy with everything.  

So, we tossed some sand in the ported section to look for gather, or dead space. Maybe add a angle and test. As we watched the sand move, we noticed the floor getting worked. So, we put milk jugs in it, and bounced them around some........... As beef as this is, we didnt care for the movement. 

1" dom, with 8" wide 1/4" plate.

 

 

 

 

[Kylar96 132]

On 6/25/2016 at 4:55 PM, Billy Jack said:

 

 

[Billy Jack 145]

I can't wait to finish up my spl rig. If I could ever get another crescendo 3500 to match the one I got I could but every time I check there sold out or on back order. I'm about to give up ever getting another one and sell this one and buy 2 ampere audio amps instead. I have 2 sundown team subs and really need more power. I also have a sq setup in my new car that's all JL and alpine. 13w7's, HD1200/1's 137bt hu JL C2 61/2's and 6x9's and a alpine amp running them. Plus one 1000 watt capable battery in the trunk.1

[Kylar96 132]

Got the old(ish) hairpin alts out and sold, .... got the bracket off. Took to work, ....  just some lunch, and a 6 pack of shock top for a lil help.

 

Troublesome bolt hole chamfered, and TIG welded.

 

 

No more clearance issue with a pan head here. 

 

 

 

 

And the motor mount ear tab that snapped off because of the 2 tac welds they kinda put on there.

 

 

 

 

 

And, the man text me around noon. This, is with the larger 1.9 pulley at low rpms (what we need for the long runs, not being able to be in the car. We have a throttle cable, but we adjust to 2k, and drop to 900 or so with in a few seconds. These will do some work )

 

 

 

Yes sir. 

 

 

 

we happy, they will be over nighted tomorrow...... see ya wensday. 

[Billy Jack 145]

NICE!!! 

[jcarter1885 995]

Sex right there, love that color as well.

[Kylar96 132]

23 minutes ago, jcarter1885 said:

Sex right there, love that color as well.

Wurd. I love love the color. He left the tooling marks in it, then took it down some. When they are in hand, ill get better shots.  Gonna make our engine bay look like complete shit lol

[Kylar96 132]

Few days ago, when we pulled all the alts and bracket out. We mounted one of the 370s to go dick off with........

 

18hz

(also, the doors have "some" metal in em....)

 

 

[Randal Johnson 544]

Looks loud enough to where I don't want to sit in it.

LOL looks bad ass homie !!! 

[Kylar96 132]

On 7/26/2016 at 9:55 AM, Randal Johnson said:

Looks loud enough to where I don't want to sit in it.

LOL looks bad ass homie !!! 

Thanks Randal. 

Got the new cases in yesterday. 

 

 

 

 

 

 

[jcarter1885 995]

Dope

Edited July 29, 2016 by jcarter1885
Spelling

[Kylar96 132]

Got the alts back in......  

Figured with having all that sex there, we found a new intake tube to go pass side, so you could see em.

 

3x show over the last weekend. Great turn out. Some wicked loud there. Great rigs.

1st in street beat 5plus, and first in psyclone. Second in bass race. Some team from canada drove 19 hours straight, in a purpose rig and shit on everyone. Ive seen Pez's van do a 66.4. The loudest burp ive seen with my own eyes, but, he backed it with 2 dead nut 59.9 bass race runs. Ive never seen that with my own eyes before. Wicked.

 

 

Numbers are still down  and we cant figure out why. My guess is the floor being repaired and dampened. I cant think of anything else. .... anyway. Still having a blast. Gear ran all day, demo'd for hours, the alt belt never squeeked, nor did we lose a belt, i think we got that figured out, thank god, only took 5 months of heart ache,... put up OK numbers, and we were the only rig to do every discipline .....Just cant figure out the loss. Want high volt bank

 

 

[Notorious97200 339]

That looks insanely loud (with 1 alternator only) ! 

Congrats.

 

[Kylar96 132]

Welp, we were gonna wait till next season for any large upgrades. But......

Sold the 7500's and cap banks.  And well.......

 

20 xspower D1600s.

Got a shipment coming from Michael also. 3 seperate transpos for each alt. One alt will run the 12v side, keep the ECU happy, and run the non happy 4chans that dont like upper, and 3 for the bank. And yes ONE transpo on each alt. Just for realiablity. 

 

Stay tuned

 

 

[Jay-C76 333]

Skids of gear!

[Kylar96 132]

Yes sir. 1100 pounds, shipping weight.  burban isnt gonna be happy lol. Also, ive done a few audio builds in my time. And this is the first time ive ever gone high volt. Skipped right to 18v LOL. Ive been told these 3800s come the fuck alive up there. Which is awesome because i think they do some great work at 12v. Im wondering about soft parts now, but, meh.... time will tell. Im hoping this gets to our 159.99 goal.  Time will tell. Boards come out this weekend, and getting the bank in begins. Im hella stoked. Thanks for looking.