Choked RL-P's

[9512ss 0]

Would two 15 inch RL-Ps be choked in 3.2 cubes sealed for both woofers? Would Polyfill help at all? Thanks

[mrray13 30]

IMO, they will be choked, you will lose some of the low end extension, but have awesome transient response! yeah, polyfill will help. a good rule of thumb is 16oz per cubic ft. leave it good and fluffly or you defeat it's purpose.

btw, how much power will you be using?

wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

[Eldorado 0]

Fiberglass insulation > polyfill

Choking them would be putting them in 2ft^3 sealed.

Id try it and see how it sounds.

2 15's should have enough low end even in a small sealed

[mrray13 30]

Fiberglass insulation > polyfill

Choking them would be putting them in 2ft^3 sealed.

Id try it and see how it sounds.

2 15's should have enough low end even in a small sealed

i'll have to try the FG...

he's talking about 1.6 per= choking..

maybe...

true, but he'd be losing some anyway. they would sound ton's better, IMO, in at least 2.25-2.5ft^3 sealed.....

idea...

buy a single 15 , but it in the 3.2ft^3 box, but ported. that would be serious wangage!

wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

[Eldorado 0]

Single 15 ported would be better

[9512ss 0]

i owuld like to do the ported deal but i dont have the knowledge tools or ability to build one and i dont trust the guy to make one...

someone want to build me one for my 95 z28?

[Eldorado 0]

We can help you

And if you use round ports all you need to know is how to cut a circle for it

[Aaron Clinton 2,372]

like Eldorado said we can help, countless boxes have been designed on here,

the best thing is that it really is not just one person designing it, there are multiple people who have experience and know how to help out.

[///M5 2,833]

All you will need to do is follow directions. If you aren't doing the design the assembly of a ported box is about the same other than you have an extra circle to cut.

[9512ss 0]

i understand its pretty easy but i dont have the tools or space to do it...

that is the problem

[Aaron Clinton 2,372]

if you want to there are a few people on here that will build and ship

[9512ss 0]

i may have to do that but i just really wanted it to have the beauty board for when its in the well...

and the guy builds ported boxes, i just dont know if they are reasonably tuned or what

Edited July 13, 2006 by 9512ss

[Aaron Clinton 2,372]

its a shame another member sold his box for his camaro not to long ago,

but the 1st one is attractive

[9512ss 0]

where can youg et aeroports at now days?

[Eldorado 0]

My friend has 4 un used ones.

We decided to seal his 18 instead or porting.

Shoot a PM at dalucifer

[jearhart 0]

you can get aeroports at www.partsexpress.com

[9512ss 0]

you guys think if i ordered the like 3.2 box for a single fifteen and had him add two holes to my desired width i could just throw the aeroports in myself so i know they are right?

[Adrian_D 520]

can't you tell him to build a ported box tuned to x hz ?

[mrray13 30]

you guys think if i ordered the like 3.2 box for a single fifteen and had him add two holes to my desired width i could just throw the aeroports in myself so i know they are right?

yeah...

or like adrian mentioned after this...

jsut have the guy do it. tell him what you want it tuned too...

wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

[9512ss 0]

i sent him an email about a ported box and he didnt really seem to sure about the whole idea of a tuning frequency i desired

his reply was yes, i can add more port, when i asked if i could choose a desired tuning frequency

[Adrian_D 520]

if that's the story, i guess you should tell him to build you a sealed box, and let the guys here "design" a ported box starting from the volume of that box.

you will just have to cut 1 or 2 circles and mount aeroports in them.

[9512ss 0]

if that's the story, i guess you should tell him to build you a sealed box, and let the guys here "design" a ported box starting from the volume of that box.

you will just have to cut 1 or 2 circles and mount aeroports in them.

<{POST_SNAPBACK}>

thats what i was thinkngi but just asking ihm to go ahead and cut the holes so he can still do the covering then i can add aeros later.

i found a good deal on some big equipment for my jeep so i may go that route and just throw an rli or something int he camaro for now

[Adrian_D 520]

if that's the story, i guess you should tell him to build you a sealed box, and let the guys here "design" a ported box starting from the volume of that box.

you will just have to cut 1 or 2 circles and mount aeroports in them.

throw an rli or something int he camaro for now