Project "GET LOUD!"

[Godsmack 361]

Heh, 1990 is the oldest that edmunds goes for and dealer valuein good condition for our zip is only $395. Thoes people are crazy. I should print that out and take it to them then offer htem $250

<{POST_SNAPBACK}>

Good luck. Some dumb ass prolly will take it for 1k.

J

[CBFryman 2]

fudge it, i gotta save for new Clutch, Intake, SPL, and Boat.

i taught my friend how to drive for skiers today so now i have someone to go to the river with. He also has a privet boatramp on the river.

Rich friends FTW.

I also got him hooked on wakeboarding....

[jntar 15]

Update:

New starter battery

New fuel filters (car has 2)

New fuel lines

New link fuses

gas + fuel stabil

New thermostat

New oil cap

Antifreeze

Oil and filter

Total of ~$130

Carberator is leaking gas behind the carb. It was dark so I couldn't tell if it was the gasket or something else. Should be a fairly quick and reasonably priced fix.

Just scored a fully intact stock air intake for $40 on egay

Getting some pics on a fully intact front bumper. I have friends who say they know where to get bumpers and fenders, so I may hold off on buying it.

New total of $170 in parts...$100 in towing. I need to buy a trailor.

[CBFryman 2]

got watermelon farms near you?

we picked a little 4'x8' flat bed with a flat tire off of a local farmer for $100. $50 for a new tire and rim and it is good to go.

[CBFryman 2]

4'x8' should handle a 'rex too. maybe not the suspension/axle. But dimetion wise.

28 cynder blocks and 6 40lbs bags of top soil and we blew the bead on the tire with the last bag.

that is ~ 1400lbs i think

[jntar 15]

Car is 1300lbs + 700-800 in equipment. I need a car trailor that my truck can also handle. I am going shopping for one asap.

[CBFryman 2]

worse comes to worse you could build one for less than $500 if you are a decent welder and have acess to a good MIG if you need it made out of aluminum t osave weight or just Heli Arc if you can use steel.

What truck do you have?

Also, if you build it from steel dont use galvanized steel. it'll make you sick as a dog. Just take the time to paint it afterwards

[jntar 15]

worse comes to worse you could build one for less than $500 if you are a decent welder and have acess to a good MIG if you need it made out of aluminum t osave weight or just Heli Arc if you can use steel.

What truck do you have?

Also, if you build it from steel dont use galvanized steel. it'll make you sick as a dog. Just take the time to paint it afterwards

<{POST_SNAPBACK}>

I'll just buy one. I dont have access to a welder and I have no experience.

My truck is a '02 Silverado Reg cab 1/2 ton 2 wheel drive.

[CBFryman 2]

pffft, my truck could tow most smaller trailers with the Rex and all equiptment.

I was thinking you had liek a 4cyl '94 S-10 or something

v8 im assumieng.

[jntar 15]

pffft, my truck could tow most smaller trailers with the Rex and all equiptment.

I was thinking you had liek a 4cyl '94 S-10 or something

v8 im assumieng.

<{POST_SNAPBACK}>

Its a 5.3l

The reg cab 1/2 2 wheel drive doesnt have a very large towing capacity compared to a 4x4...UHAUL wouldnt even rent me a full size trailor. I had to always use a tow dolley.

[Eldorado 0]

Update:

New starter battery

New fuel filters (car has 2)

New fuel lines

New link fuses

gas + fuel stabil

New thermostat

New oil cap

Antifreeze

Oil and filter

Total of ~$130

Carberator is leaking gas behind the carb. It was dark so I couldn't tell if it was the gasket or something else. Should be a fairly quick and reasonably priced fix.

Just scored a fully intact stock air intake for $40 on egay

Getting some pics on a fully intact front bumper. I have friends who say they know where to get bumpers and fenders, so I may hold off on buying it.

New total of $170 in parts...$100 in towing. I need to buy a trailor.

<{POST_SNAPBACK}>

Not bad.

Better than selling it

[Tirefryr 1,742]

Car is 1300lbs + 700-800 in equipment.  I need a car trailor that my truck can also handle.  I am going shopping for one asap.

How the hell did you guys get that thing down to 1300 lbs? Is there no engine/transaxle in it? That car should be close to 2K stock.

[Eldorado 0]

http://www.crxsi.com/specs.htm

No kiddin

[CBFryman 2]

No interior + lack of body panels?

i didnt even think about that.

[jntar 15]

Car is 1300lbs + 700-800 in equipment.

[CBFryman 2]

tittle is probably off by one to two hundred maybe.

[jntar 15]

[Eldorado 0]

I see the new filter...fancy fancy

[Acidburn 10]

wow, that really is a rat's nest of vacuum hoses lol

atleast it's running now

[jntar 15]

wow, that really is a rat's nest of vacuum hoses lol

atleast it's running now

<{POST_SNAPBACK}>

Its terrible. Still need to get the gas leak looked at. It has gotten worse.

[///M5 2,833]

Bathtub sealer FTW.

[Eldorado 0]

Need about 2 bottles

[jntar 15]

Bathtub sealer FTW.

<{POST_SNAPBACK}>

Please elaborate. I dont really understand.

[Tirefryr 1,742]

Where's the fuel leak problem area?

[jntar 15]

Its either on the carb gasket or in the gasket to this thing. Still trying to find what it is in my manual. Its not leaking at the top, but at the bottom where the arm extends into the carb.

Little better pic...