building a box for a 15" MAG

[havok13154 0]

ok my friend will build me a box in his wood shop but i need to get him plans. SI 15 MAG, ported. what do you think of the aeroports? is it worth it for only $25 extra? most people use 2 of them at $12 each.

power will be a hifonics ZEUS 1000D 1000@1ohm

it is a lexus 2002 es300. should be the same as the new camrey. people have put 2 15 in there before with a almsot bent box. i only need 1.

the red strap is what i will be using to hold the sub in place, i would also love there to be ehough room to put my trunk battey next to the box. it is 6.5 inches wide

demetions are (IMG:http://members.cox.net/havok/trunk.jpg)

THANKS FOR ALL THE HELP I AM FINALLY BUYING A SUB TO FINISH MY AUDIO SYSTEM AFTER 2 YEARS!!!!!

[Tirefryr 1,742]

YOu can use whatever you want for vents. A slot vent would be cheapest and easiest, but depending on tuning, they can take up quite a bit of volume and necessitate a rather large enclosure.

[splblazer98 1]

heres the box i built for a mag 15 i dunno if it will fit or not

i know the hole cut out says 11" but its 14" i screwed up when making the labels

Edited July 4, 2006 by splblazer98

[havok13154 0]

OMG thanks so much.

when we build it, i'll try and get a GOOD pic for you.

how was this done cad? or a program for boxes.

did you screws on top where the port was? 3/4 mdf is what i want to use.

so how did it hit? with how much power?

will this fit over it and not let the sub hit it. http://www.cardomain.com/item/RTEGP15

thanks a lot, i owe you one let me know if i can help you with anything.

fixed the pic for you

Edited July 4, 2006 by havok13154

[Tirefryr 1,742]

A conventional grill wil not fit. The only available grill that will work will be the bar type grills such as this:

http://www.partsexpress.com/pe/showdetl.cf...tnumber=260-444

[havok13154 0]

damn i really want somehting for protective. when i get it i'll mesure it and dubble it and then if i can make a baffle around the sub then get the standard one but it will be rasied.

[CBFryman 2]

bar grills dont stop much as far as punctureing the cone. just stuff pressing agianst it.

[havok13154 0]

what do you think of this grill? will it clear?

http://cgi.ebay.com/1-SOUNDSTREAM-15-GRILL...1QQcmdZViewItem