Enough Power?

[Oak244 0]

I am considering a different amp combination. Would a DLS A7 with 600 watts in 1 ohm, be enough to run a Gen 2 SI 12"? I only have 1 sub, but am considering running 2 A7's and get a second 12" sub. So how would 1 sub with 1000 watts compare to 2 subs with 600 watts each?

[Eldorado 0]

Should be plenty for 2.

I doubt the 1 with 1000W will be louder than the 2 with 600W

[Tirefryr 1,742]

Agreed

[Tirefryr 1,742]

Agreed

[Oak244 0]

One other question though. What kind of space will I need for 2? I had a ported box designed for a single 12" and it takes up a good portion of my trunk!! Now someone once said to seal my trunk and not use a box. Does this mean that the trunk is no longer useable? Or that sealing up all the cracks and such with sound deadener would be fine?

[Eldorado 0]

Doign IB is a lot of work and wont get you the most output.

And the driver needs to be sutiable for IB application.

[Electrodynamic 2]

All of our Mag's both new and old are suitable for IB. However, running IB is a lot of work...mainly sealing off your trunk from your cab.

[///M5 2,833]

When you include the space for a labyrinth and low tuning the box size for 1 ported is usually near the same size as 2 sealed. Doubling your drivers in either configuration will pretty much require double the box though.

[Oak244 0]

When you include the space for a labyrinth and low tuning the box size for 1 ported is usually near the same size as 2 sealed.  Doubling your drivers in either configuration will pretty much require double the box though.

<{POST_SNAPBACK}>

Yeah due to that, I think I will have to scratch the idea. The box designed takes up about as much space as I am willing to let go of.

[///M5 2,833]

Is one not enough? I just imagine that poor Corolla shaking apart.

[Aaron Clinton 2,372]

I loved the sound of the mag off about 450 watts