3 Fi sp4 15"s, 6th, 8.0 TFE, kerfing, fiberglass, "El Nino&#34

[lownlouddd 125]

this is an extreme build, no fucks are given about competing unless they make a class that measures how windy your shit is, goals are 15-40hz with as much output as possible, car is a daily driver, lets get it goin.

 

relocated the head unit to the old cassette player location so I can do a modified dash bezel to hold an ipad and other shit

 

doors were up first, single Crossfire XS 10", sealed up, midbass for days

 

 

 

 

 

 

glassing bolts in so i can secure the pods to the door easily and securely

 

 

teaching my boy how to glass

 

[lownlouddd 125]

 

trimmed up

 

 

 

1/4 thick

 

 

 

 

 

 

 

 

[lownlouddd 125]

helpin the homie knock out some pods for his blazer

 

 

no bondo yet, all glass, i dont like using much bondo.. just fill with resin.

 

 

primed and now just chasing out pin holes, very skim layers of bondo

 

deadening the floor

 

2 layers of 60 mil, its gonna get wood and foam soon so that was pointless lol

 

pods almost ready

 

 

door cleaned up

[lownlouddd 125]

mmmmmmhmmmmmmmmmmmmmm PL  

 

time to start the box

 

 

 

goodbye rear deck, left the supports in on the sides to retain structural rigidity

 

 

PL is life

 

doubled up everywhere

 

 

side walls going in

 

 

kreg jig is life

[lownlouddd 125]

2x4s FTW

 

and now to start the roof, 3 layers, 2.25" thick, all kerfed to get maximum airspace for the box/ultimate false roof

 

 

 

 

 

 

 

[lownlouddd 125]

for those who know me or any of my builds, i love plexiglass lol it gets used whenever applicable

 

 

1st solid layer in, one more to go

 

 

 

 

 

2nd layer in, still need to make side pieces but the base of it is in

 

 

[lownlouddd 125]

 

sanded a lil round over onto the front finish piece, not lookin forward to filling the screw holes....

 

lil present came in the mail, chevy case Singer 320. this will be my secondary alt, hoods probably getting cut to fit it too, #nofucks

 

also have a singer 320 for the stock location as well, should keep the TFE 8.0 happy..

 

some random kerf action

 

yesssssssssssssir

 

 

a amp this big and sexy calls for plexiglass and leds.. its a comin

[lownlouddd 125]

final roof piece before i put it in 48x31 lol

 

subsssss

 

 

 

 

 

 

start of my pillars, 2  PRV 450ti's per

 

some bullshit flush rings lol

 

 

 

this has been chillin since i had the burban, finally will be able to install it

Edited November 17, 2015 by lownlouddd

[lownlouddd 125]

start of the baffle

 

 

ohhh its close.. like always

 

aye aye aye

 

test fitting

 

probably gonna get a 480 soon but atleast for now, my battery for the build, yes, battery, as in singular

 

 

already startin to sag

 

some plexi would look right at home on these side panels hmmm

 

3/4 all thread in there

 

dem doors

 

doors installed, gonna wrap them in vinyl here in a few weeks

 

some 12v metalworks accessories, ground block 3 in-3 out, 3/0. also have a 4 in 4 out 3/0 fuse holder

 

 

wanna do a nice LED dome light like this I saw in Cole Morris Colorado

 

baffle in there, got some 1/4 angle iron on the sides to bolt the baffle in

 

build is current now. more to come soon, been slaving on other projects but im just about caught up now so should be able to get back on this ASAP

[lownlouddd 125]

 

start of the baffle

 

 

ohhh its close.. like always

 

aye aye aye

 

test fitting

 

probably gonna get a 480 soon but atleast for now, my battery for the build, yes, battery, as in singular

 

 

already startin to sag

 

some plexi would look right at home on these side panels hmmm

 

3/4 all thread in there

 

dem doors

 

doors installed, gonna wrap them in vinyl here in a few weeks

 

some 12v metalworks accessories, ground block 3 in-3 out, 3/0. also have a 4 in 4 out 3/0 fuse holder

 

 

wanna do a nice LED dome light like this I saw in Cole Morris Colorado

 

baffle in there, got some 1/4 angle iron on the sides to bolt the baffle in, it is cut for 4 15s and so that i can build a plug and move the port around so i can try different orientations to see what is loudest.

 

build is current now. more to come soon, been slaving on other projects but im just about caught up now so should be able to get back on this ASAP

 

[lownlouddd 125]

lil distance test on the doors

[antoinez28 62]

Wow

[daviddto 90]

Damnit boi! This build log escalated very quickly. 

[S.DeYoung 968]

door pods are sexy

[germanyt 0]

Should be ridiculous.  Tuned in.

[Cruz87 30]

I'm tuned in

Edited November 18, 2015 by Cruz87

[frogcase2002 393]

How did you mount the pods to the doors?

[lownlouddd 125]

How did you mount the pods to the doors?

 

1/4x20 bolts through the pod and door panel, nut and washer on the back

[lownlouddd 125]

updates

 

ready to pull a all nighter

 

 

 

 

 

 

 

primered up to see what still needs attention

 

 

plexiglass there? eh, fuck it why not

[lownlouddd 125]

mas primer

 

uh oh, got a hole in muh box

 

 

 

this should be sick once illuminated

 

 

more coming tomorrow. or well, today

[lownlouddd 125]

floor pieces

side mounting pieces for the plexiglass

getting close, just need to fill a few more holes then start wet sanding

[lownlouddd 125]

Lots of pics to be uploaded but fuck all THE there's some vids, I'll upload the pics later

Some footage of the Honda from the weekend, a lot of work to do still. Need to seal off. Need to address voltage it was garboooo, 1/8 gain and seein mid 11s:( munch more alt powa needed lol. Anywho, enjoy

https://www.youtube.com/watch?feature=youtu.be&v=aoiD6-HQ4j8&app=desktop

  Edited December 8, 2015 by lownlouddd

[lownlouddd 125]

 

[lownlouddd 125]

double

Edited December 8, 2015 by lownlouddd

[germanyt 0]

The loading wall seems awful thin.  And port area huge.  Almost seams like it would just act like a sealed enclosure.

 

 

edit.  nvm forgot this is a 6th order.  The whole time I'm looking at the 4th hole like it's for a sub.

Edited December 18, 2015 by germanyt