B2 tahoe

[jcarter1885 995]

Cool ass way to elevate the box

[liljestrand 244]

Fairly cheap and easy. Cost about 15 bucks

[antoinez28 62]

So is this below the window line

[hdrox88 142]

What? No second row amp armrest? XS Power armrest instead I see?

[liljestrand 244]

I think it's just above window line Iirc. But it's under 25" which is what I need for suv for iasca

[daviddto 90]

Awesome work, Love this build

[swift 501]

4 Elites, damn that's serious voltage. 800 amps at idle, damn this will be a demo monster

[Sencheezy 689]

siiiick

[liljestrand 244]

working on the cooling fans

making a platform for the amps

and a platform to raise the amps up to allow the fans below to breath

so with the original baffle we ran into 2 problems, 1 I accidently cut the speaker cut outs a half inch too big and 2 the motors for the front subs was right above the port. So to alleviate that we centered the back 2 subs and moved the front 2 subs back.

also we need an engine hoist to get this thing out and thats without subs.

thats about all i have for updates. will hopefully be able to get more into this in the coming weeks.

[Lee Carter 150]

Some sexy equipment in this build!   

[antoinez28 62]

A I really want to build another box can you pm me via email...

[liljestrand 244]

What do you want to know.

[antoinez28 62]

You have a Facebook

[jcarter1885 995]

You have a Facebook

Dont be afraid to ask him on here, I'm pretty sure whatever you need to know could help others on the forum as well.

OP build log is getting better and better, box came out way better than mine

[liljestrand 244]

Like Jay cee said I'll help out here as much aS I can

[ohio45113 24]

For the old box you had. You said the motors were right above the port? Like blocking the port? Or just covering the back of the sub? What kind of issues would that cause?

[liljestrand 244]

The sub was above the port wall. I could barely fit a finger underneath the motor. Thus the vent hole was covered up pretty good. To allow for better cooling I moved those subs back so there is a good 5 inches or so behind the motor

[ohio45113 24]

The sub was above the port wall. I could barely fit a finger underneath the motor. Thus the vent hole was covered up pretty good. To allow for better cooling I moved those subs back so there is a good 5 inches or so behind the motor

Thanks for clearing that up for me. Was just asking because my box for my zcon is similar to the way you described.

[liljestrand 244]

Iirc the zcon doesn't have a pole vent. So you should be perfectly fine.

[ohio45113 24]

Iirc the zcon doesn't have a pole vent. So you should be perfectly fine.

Nah it doesn't have one. So I'm good. Thats why i was asking incase there was a different reason you changed your box.

[Shogen 325]

nice work!!

[liljestrand 244]

[liljestrand 244]

Made a center console for the rear buckets to house the batteries. Also has a cupholder and a usb/lighter plug in.

B2 hn6 pa mids and id horns.

[antoinez28 62]

Hows the build

[SacredTanakh 67]

Ahh I love b2 idk what it is but I find it hard not be drawn to their products. How do you like the b2 mids?