proposed build..

[mrray13 30]

i preferred the CVX (pretty much same thing but round) and i really really don't like their 8" mids (rmb's or ss's) as i need something with a lot of prescence and output; they were a little dull for me.

nonetheless, i love their amps (their multi-channels even more) and it should be a nice project.

round defeats the prupose of physically fitting, plus, we just got the cvx's in, so i haven't had a chance to hear them. but i really enjoy the 06 L7's...

dull mids huh? care to ellaborate on your install? i'm going for quite a bit of presence with these myself, hence them getting 400+wrms. dunno if i'm going to seal or port them yet, if airspace allows, probably ported somewhere's around 75-80hz.....maybe...lol....

i hope it turns out as nice in reality as it is in my head....

wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

[JoeHemi57 0]

isn't the sub channel mono and the midbass speakers should be run in stereo correct?

[JimJ 11]

Yes...

[Tirefryr 1,742]

Yes...

Not necessarily. Hmm. . . . Where was that big debate we had. . . Screw it. Personally, I wouldn't do it, but it CAN work in a few instances. Think frequency response in relation to localization.

[mrray13 30]

ok, this was something scott and i was talking about...

we figured it would work because of the location of the mids and their aiming. they are going in the doors, about even with the midrange, well, a little higher, and they will be aimed across the truck and up. do you think that will work?

kicker doesn't make a 6 channel, so that's what i have to work with. i'm not running three amps either, because of where they are going.

comeon, help me out. i'm probably starting this around wednesday.

wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

[Aaron Clinton 2,372]

I am very curious about the CVX's, because I miss my classic round solo barics. They are one of the few subs I wish I had back.

[JoeHemi57 0]

Personally i would go with the zx850.4, run the midbasses off 2 channels and the SS comps off the other 2. run the 5.25's off the deck and you should be good to go.

[DevilDriver 28]

i preferred the CVX (pretty much same thing but round) and i really really don't like their 8" mids (rmb's or ss's) as i need something with a lot of prescence and output; they were a little dull for me.

nonetheless, i love their amps (their multi-channels even more) and it should be a nice project.

dull mids huh? care to ellaborate on your install? i'm going for quite a bit of presence with these myself, hence them getting 400+wrms. dunno if i'm going to seal or port them yet, if airspace allows, probably ported somewhere's around 75-80hz.....maybe...lol....

94 Civic. started in the doors on 200 watts. at first i thought maybe it was just poor off-axis response. then we moved it to the kicks and changed to 250 wpc... still disappointed. i greatly preferred my extremis', particularly below 200hz (i have had the extremis' from 70-3.5k and the ssmb8's from 75-400). a lot more prescence and i preferred the tonal quality as well.

[Chevy350TPI 12]

Any updates / progress / thoughts Kent?

I'm interested in this ... especially the enclosure, obviously.

[mrray13 30]

no updates yet..still gotta find time. i will talk to scott tomorrow about getting the amps, the wiring and the subs. everything else is set....

jsut gotta get to work basiclly. the wife is being a bit tight on the fundage as i just dropped $670 (i love ebay) on tires for both the scoot and the truck and a mild (leveling) lift for the truck. but it's still a go, just a bit on hold as you will...lol..

wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

[Eldorado 0]

for the kit

[mrray13 30]

for the kit

you will get pics. nothing amazing, just a leveling kit. between 1-3" for the front, that's all....lol. putting 285/75-16's on it..which means roughly 33-10.50-16..

but hopefully this weekend!

wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee