1995 Eagle Talon Wall Build

[mikey5472 16]

It is a process and learning experience in the making.

I have been doing builds for about 6 or 7 years now (been slacking last couple years lol), but never had a vehicle i wanted to sacrifice for a wall. Well i do now... The build is going to be a few months in the making. Or years as most walls are and change a lot over the course of their life.

 

Product list.

 

1995 Eagle Talon Esi

I haven't decided on head unit yet. Looking for a decent double din, or a nice Single din.

2 18" Sundown Nightshade V1 motors (not sure on drop in yet.) Looking at psi or ZV3.

1 Crescendo BC5500

4 deka 9a31's

100+ ft of AT 0 gauge

Singer 190 amp alt with external regulator

2 PRV 4 inch horns

2 PRV 8's

4 3" dayton fullranges

2 4" dayton mid ranges

mb Quart ref 50.4

Crunch prz 1600.4

Looking at deadner still. (SDS or AT)

 

For some reason My computer will not allow me to upload pictures So thats going to hae to wait until tomorrow. Sorry Ha!

Edited September 10, 2013 by mdizzle5472

[lithium 358]

10 lbs of shit in a 1 lbs bag ehh? 

[rowdyful7 10]

im ready to see pictures! sounds like a nice build

[jcarter1885 995]

Sounds good, I would scratch some of those mids or the horns.

[mikey5472 16]

10 lbs of shit in a 1 lbs bag ehh? 

I think 600 pounds would be a more accurate guess. Hah

[mikey5472 16]

Sounds good, I would scratch some of those mids or the horns.

I already have the horns, they re gong to be mounted under dash more than likely with not a lot of power to them. The 3" will be in a pillar and the 8's and 4's will be in doors. I Thought about scratching the 4's in the doors and may still, basicly they would be kind of pointless and wouldn't really be able to aim them correctly to make a difference.

[jcarter1885 995]

Just keep it simple, an 8" and horn in each door. No 3" or 4" from Dayton, just too much going on in my opinion

[mikey5472 16]

Just keep it simple, an 8" and horn in each door. No 3" or 4" from Dayton, just too much going on in my opinion

I will definately take that into consideration. I have yet to order any of the mids yet, so Can try out the 8's and horns first and see how i like it. Thanks bro

[mccleery3 166]

Welcome back Mikey!! Eagerly awaiting the pics

You got a little bit of Shizzzon in this build.....LOL!

[jcarter1885 995]

no problem, I been in this situation of putting a ton of speakers in for just the front stage. Over the years of learning and being on this site it can be done with less equipment. Sound just as loud and tons better.

[///M5 2,833]

Just keep it simple, an 8" and horn in each door. No 3" or 4" from Dayton, just too much going on in my opinion

Yep, as in WAY TOO FUCKING MUCH. It'll only detract and not help. KISS first, then see.

[mccleery3 166]

I agree with the other guys as well. The best move would be to KISS with the minimal amount of speakers along with decent power & good processing.

[porkchop 304]

Looks amazing....yeah, i getz inside scoop and pics!

[mikey5472 16]

[mikey5472 16]

Also decided to just stick with the prv 8's and 4" horns. And picked up 2 saz 3500's to power the nightshades, even though it will be a bit much for them in all reality.

[jcarter1885 995]

Nice, looking good so far

Edited November 18, 2013 by jay-cee

[Shogen 325]

nice !!! more pics!!!

[porkchop 304]

He loves to be a tease...few pics later...he will be on demos!

[nadcicle 77]

Also decided to just stick with the prv 8's and 4" horns. And picked up 2 saz 3500's to power the nightshades, even though it will be a bit much for them in all reality.

 

If you went with the nsv1 and zv3 parts, then it will not be too much. Have a local here running 2 4500's per 18" with extremely similar setup on the sub. He currently does around a 65 with em. 

[mikey5472 16]

Was

 

Also decided to just stick with the prv 8's and 4" horns. And picked up 2 saz 3500's to power the nightshades, even though it will be a bit much for them in all reality.

 

If you went with the nsv1 and zv3 parts, then it will not be too much. Have a local here running 2 4500's per 18" with extremely similar setup on the sub. He currently does around a 65 with em. 

I have a zv3 drop in on a nightshades that's built as a 12" now. There were 2 til I blew the spiders gave out on one. Lol. I was thinking about sticking with them, but also looking at psi and Tantric.

[mikey5472 16]

For an update I just finished sanding all the resin and inside of the enclosure. Depending on temperature tomorrow I will be throwing 2nd layer of fiberglass resin in. Then sand again and go from there. Still need to cut front baffles, build battery and amp rack, run a bunch of wire, build doors, buy batteries and recones. Buy some carpet because a can of expanding foam blew up in the car. (was not cool) lol

[porkchop 304]

Nice progress if first layer is already knocked down!

[mikey5472 16]

Nice progress if first layer is already knocked down!

Yep laid it yesterday and sanded it down today.

 

 

Also may have new job soon... With att... Installing Uverse....

[mccleery3 166]

Get that $$ son!!

Looks like good updates

[mikey5472 16]

2nd layer of resin is completed.