INput about new driver

[Upstage Audio 0]

OK, well wondering what your opinion is on dedicated midbass drivers like the JL 6W0, TB 6.5, EU-700 and things of that sort? If one say had a higher frequency range say 10hz-4khz, would you use it? in a 2way or 3way setup? vented or sealed or in door. What price would you go for?

[flakko 1]

isee, you planning to make your own woofer huh? for that freq range w/o the nice beaming, id say 50/driver.

i would use it in a 2 way, and if space allows vented

[mrray13 30]

neo or ferrite? that wide of a range, i'd pay 35-50 a driver depending upon motor.

IB in door more then likely. 2 way set up.

wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

[Upstage Audio 0]

its a normal magnet( no neo)...and its not mine its someone who I deal for so take your pick. I've seen pics but they wanted some feedback as to how well they think it will do. I think it will do very well. I think the free air resonance is at 52hz. Peak XMAX is 10mm. Needs 150rms to run though.

[flakko 1]

have any pix of them? with that high end extension, i would be definitely interested

[Upstage Audio 0]

i'll send you a pic tonight flakko

[flakko 1]

koolz! let me know! and you got an email... your pm box aint workin

[CBFryman 2]

dedicated midbass capeable of producing usable sound below 40Hz while still playing up to 4kHz...i'd like to see that

[mrray13 30]

how's this going? and where are my pics??

i'm getting really close to buying a set of kicker rmb 8's for the truck.

wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

[JimJ 11]

dedicated midbass capeable of producing usable sound below 40Hz while still playing up to 4kHz...i'd like to see that

<{POST_SNAPBACK}>

Already out there.

But it's heavily enclosure dependent

[Aaron Clinton 2,372]

pix?

[RPM 0]

pix?

<{POST_SNAPBACK}>

sounds like it might work sweet with a horn setup

[Upstage Audio 0]

pix?

<{POST_SNAPBACK}>

sounds like it might work sweet with a horn setup

<{POST_SNAPBACK}>

Sens.-88.1

RMS-150

Freq Rep-10hz-4khz

VC Diameter-1.37"

Peak Xmax-10mm

Free Air resonance-52hz

[flakko 1]

huh? itsa cdt?

[Eldorado 0]

and of course they need 150+W to sound good

[cougarballa2k5 0]

Pretty sweet, are those 6" what is the model #? And what type of enclosure?