Would it be safe to run my Precision Power Black Ice 1800.1 at 1 ohm?

[DanP 19]

I have the 4.0 in my Jeep as well I managed to fit a breaker bar in there but it was extremely tight. You could also pull off the radiator fan too its only like 4 small bolts and a harness.

Edited June 4, 2013 by DanP

[mlcantin 32]

I have the 4.0 in my Jeep as well I managed to fit a breaker bar in there but it was extremely tight. You could also pull off the radiator fan too its only like 4 small bolts and a harness.

what bar did you use? And dropping the fan would be a pain in the ass

[ssh 924]

I have the 4.0 in my Jeep as well I managed to fit a breaker bar in there but it was extremely tight. You could also pull off the radiator fan too its only like 4 small bolts and a harness.

what bar did you use? And dropping the fan would be a pain in the ass

It's just a 3/4" breaker bar, nothing fancy.

[DanP 19]

 

I have the 4.0 in my Jeep as well I managed to fit a breaker bar in there but it was extremely tight. You could also pull off the radiator fan too its only like 4 small bolts and a harness.

what bar did you use? And dropping the fan would be a pain in the ass

It's just a 3/4" breaker bar, nothing fancy.

^^This and the radiator fan is a lot easier to take out then it looks its literally just 4 small nuts that are easily reachable, but you shouldnt have to take it out to get a breaker bar in there. It IS a really tight fit though

[ssh 924]

 

 

I have the 4.0 in my Jeep as well I managed to fit a breaker bar in there but it was extremely tight. You could also pull off the radiator fan too its only like 4 small bolts and a harness.

what bar did you use? And dropping the fan would be a pain in the ass

It's just a 3/4" breaker bar, nothing fancy.

^^This and the radiator fan is a lot easier to take out then it looks its literally just 4 small nuts that are easily reachable, but you shouldnt have to take it out to get a breaker bar in there. It IS a really tight fit though

I have a feeling my TJ had a bit more room than your Cherokees.

[mlcantin 32]

 

 

I have the 4.0 in my Jeep as well I managed to fit a breaker bar in there but it was extremely tight. You could also pull off the radiator fan too its only like 4 small bolts and a harness.

what bar did you use? And dropping the fan would be a pain in the ass

It's just a 3/4" breaker bar, nothing fancy.

^^This and the radiator fan is a lot easier to take out then it looks its literally just 4 small nuts that are easily reachable, but you shouldnt have to take it out to get a breaker bar in there. It IS a really tight fit though

I have a feeling my TJ had a bit more room than your Cherokees.

Wanna fight?

[ssh 924]

 

 

 

 

I have the 4.0 in my Jeep as well I managed to fit a breaker bar in there but it was extremely tight. You could also pull off the radiator fan too its only like 4 small bolts and a harness.

what bar did you use? And dropping the fan would be a pain in the ass

It's just a 3/4" breaker bar, nothing fancy.

^^This and the radiator fan is a lot easier to take out then it looks its literally just 4 small nuts that are easily reachable, but you shouldnt have to take it out to get a breaker bar in there. It IS a really tight fit though

I have a feeling my TJ had a bit more room than your Cherokees.

Wanna fight?

What?

[mlcantin 32]

That's what I thought

I have the 4.0 in my Jeep as well I managed to fit a breaker bar in there but it was extremely tight. You could also pull off the radiator fan too its only like 4 small bolts and a harness.

what bar did you use? And dropping the fan would be a pain in the ass

It's just a 3/4" breaker bar, nothing fancy.

^^This and the radiator fan is a lot easier to take out then it looks its literally just 4 small nuts that are easily reachable, but you shouldnt have to take it out to get a breaker bar in there. It IS a really tight fit though

I have a feeling my TJ had a bit more room than your Cherokees.

Wanna fight?

What?

That's what I thought. Edited June 4, 2013 by mlcantin

[mlcantin 32]

 

 

I have the 4.0 in my Jeep as well I managed to fit a breaker bar in there but it was extremely tight. You could also pull off the radiator fan too its only like 4 small bolts and a harness.

what bar did you use? And dropping the fan would be a pain in the ass

It's just a 3/4" breaker bar, nothing fancy.

^^This and the radiator fan is a lot easier to take out then it looks its literally just 4 small nuts that are easily reachable, but you shouldnt have to take it out to get a breaker bar in there. It IS a really tight fit though

How did you get the electrical plug out of the alternator?

[ssh 924]

 

 

 

 

 

That's what I thought

 

I have the 4.0 in my Jeep as well I managed to fit a breaker bar in there but it was extremely tight. You could also pull off the radiator fan too its only like 4 small bolts and a harness.

what bar did you use? And dropping the fan would be a pain in the ass

It's just a 3/4" breaker bar, nothing fancy.

^^This and the radiator fan is a lot easier to take out then it looks its literally just 4 small nuts that are easily reachable, but you shouldnt have to take it out to get a breaker bar in there. It IS a really tight fit though

I have a feeling my TJ had a bit more room than your Cherokees.

Wanna fight?

What?

That's what I thought.

You must be bipolar.

[ssh 924]

 

 

 

I have the 4.0 in my Jeep as well I managed to fit a breaker bar in there but it was extremely tight. You could also pull off the radiator fan too its only like 4 small bolts and a harness.

what bar did you use? And dropping the fan would be a pain in the ass

It's just a 3/4" breaker bar, nothing fancy.

^^This and the radiator fan is a lot easier to take out then it looks its literally just 4 small nuts that are easily reachable, but you shouldnt have to take it out to get a breaker bar in there. It IS a really tight fit though

How did you get the electrical plug out of the alternator?

Remove two small nuts.

[mlcantin 32]

 

 

 

 

I have the 4.0 in my Jeep as well I managed to fit a breaker bar in there but it was extremely tight. You could also pull off the radiator fan too its only like 4 small bolts and a harness.

what bar did you use? And dropping the fan would be a pain in the ass

It's just a 3/4" breaker bar, nothing fancy.

^^This and the radiator fan is a lot easier to take out then it looks its literally just 4 small nuts that are easily reachable, but you shouldnt have to take it out to get a breaker bar in there. It IS a really tight fit though

How did you get the electrical plug out of the alternator?

Remove two small nuts.

My alternator doesnt have nuts. It is a plug.

[mlcantin 32]

 

 

 

 

 

 

That's what I thought

 

I have the 4.0 in my Jeep as well I managed to fit a breaker bar in there but it was extremely tight. You could also pull off the radiator fan too its only like 4 small bolts and a harness.

what bar did you use? And dropping the fan would be a pain in the ass

It's just a 3/4" breaker bar, nothing fancy.

^^This and the radiator fan is a lot easier to take out then it looks its literally just 4 small nuts that are easily reachable, but you shouldnt have to take it out to get a breaker bar in there. It IS a really tight fit though

I have a feeling my TJ had a bit more room than your Cherokees.

Wanna fight?

What?

That's what I thought.

You must be bipolar.

Its from a youtube video.

[DanP 19]

 

 

 

I have the 4.0 in my Jeep as well I managed to fit a breaker bar in there but it was extremely tight. You could also pull off the radiator fan too its only like 4 small bolts and a harness.

what bar did you use? And dropping the fan would be a pain in the ass

It's just a 3/4" breaker bar, nothing fancy.

^^This and the radiator fan is a lot easier to take out then it looks its literally just 4 small nuts that are easily reachable, but you shouldnt have to take it out to get a breaker bar in there. It IS a really tight fit though

How did you get the electrical plug out of the alternator?

I wanna say I pried it with a screw driver.

[mlcantin 32]

 

 

 

 

I have the 4.0 in my Jeep as well I managed to fit a breaker bar in there but it was extremely tight. You could also pull off the radiator fan too its only like 4 small bolts and a harness.

what bar did you use? And dropping the fan would be a pain in the ass

It's just a 3/4" breaker bar, nothing fancy.

^^This and the radiator fan is a lot easier to take out then it looks its literally just 4 small nuts that are easily reachable, but you shouldnt have to take it out to get a breaker bar in there. It IS a really tight fit though

How did you get the electrical plug out of the alternator?

I wanna say I pried it with a screw driver.

How the...

[DanP 19]

 

 

 

 

 

I have the 4.0 in my Jeep as well I managed to fit a breaker bar in there but it was extremely tight. You could also pull off the radiator fan too its only like 4 small bolts and a harness.

what bar did you use? And dropping the fan would be a pain in the ass

It's just a 3/4" breaker bar, nothing fancy.

^^This and the radiator fan is a lot easier to take out then it looks its literally just 4 small nuts that are easily reachable, but you shouldnt have to take it out to get a breaker bar in there. It IS a really tight fit though

How did you get the electrical plug out of the alternator?

I wanna say I pried it with a screw driver.

How the...

Sec I AM A run out to my Jeep 

[DanP 19]

Theres a little black button push it with one hand pull with the other

[mlcantin 32]

Theres a little black button push it with one hand pull with the other

my jeep has a little black button on the top and on the bottom of the plug

[DanP 19]

Theres a little black button push it with one hand pull with the other

my jeep has a little black button on the top and on the bottom of the plug

then press both buttons in and pull it out, not rocket science  

[mlcantin 32]

 

Theres a little black button push it with one hand pull with the other

my jeep has a little black button on the top and on the bottom of the plug

then press both buttons in and pull it out, not rocket science  

I cant i only have two hands and one of them has a screwdriver in it and the other is used to pull the plug. I am short one screwdriver