2 12" zcons 4-6k trunk wall

[Drew513Ryder 7]

[ohio45113 24]

I got some 8 guage ofc im pretty sure. might be 10. ill check when I get off work

[frogcase2002 393]

Adding some 45s

[frogcase2002 393]

Going to try some 10/4 wire for the subs. Got it pretty cheap cause it was leftovers

Edited June 23, 2014 by frogcase2002

[ohio45113 24]

I got that other wire if u need it and all those blocks. just lmk

[frogcase2002 393]

I got that other wire if u need it and all those blocks. just lmk

Ill probably still need it for the ppi amps

[ohio45113 24]

I got that other wire if u need it and all those blocks. just lmk

Ill probably still need it for the ppi amps

im still on 6 12 hour days and 1 8. so you would probably have to come here but your more than welcome to it

[frogcase2002 393]

I got that other wire if u need it and all those blocks. just lmk

Ill probably still need it for the ppi amps

im still on 6 12 hour days and 1 8. so you would probably have to come here but your more than welcome to it

Mite be able to come up there tomorrow. Ill bring an amp for you to try out on your Mids/highs

[frogcase2002 393]

Pretty much just need to put the top of the enclosure on. . Going to sucked though cause my drill wont fit in the enclosure to do pocket holes and only have a little more than 5 inches on top so going to need to just use a screwdriver for most of the top screws.

[Dexter Chaos 14]

Put the bit in a rachet. Will be little easier

[frogcase2002 393]

Put the bit in a rachet. Will be little easier

I think ill try that Probably going to use a couple scissor car jacks in between the top of the enclosure and top of the trunk to "clamp" the top on then ill try using a rachet for the screws

[frogcase2002 393]

Don't mind the sloppy cuts on the holes lol. Router broke a while ago so just been using my crappy jig saw I got.

The last part of the top will be removable just in case I need to do something inside the enclosure and don't feel like going through the sub or port holes. .

Edited June 25, 2014 by frogcase2002

[frogcase2002 393]

This is how I did the baffle. Got t-nuts in the middle of the 4 layers. And there nailed in real good through the other 2 layers so wont have a problem with the stripping like the spiked ones.

[Sencheezy 689]

looking good!

[frogcase2002 393]

looking good!

Thanks man

[Dexter Chaos 14]

Awesome, I wanted to do a removable hatch on my box wasn't sure how to do it.

[Lee Carter 150]

Man- Haven't looked in here in a bit....REALLY nice work!  Love the use of the 10/4 wire, and the sandwiched T-nuts. 

[frogcase2002 393]

Man- Haven't looked in here in a bit....REALLY nice work!  Love the use of the 10/4 wire, and the sandwiched T-nuts.

Thanks! Just trying new things as I go. . Like every build I do lol

[frogcase2002 393]

Anyone know of some good batts that are 5.5 inches or less on any of the dimensions? Would like to be able to fit some batteries on top of the enclosure back behind where I put my amps

[Lee Carter 150]

http://buy.northstarbattery.com/p/sms-agm-400-battery

 

May be more than you are looking for...They are beasts.

[frogcase2002 393]

http://buy.northstarbattery.com/p/sms-agm-400-battery

 

May be more than you are looking for...They are beasts.

a couple of them would be perfect. Wish they were not so dam expensive lol

[Dexter Chaos 14]

The xs xp950 are a little over 5" wide.

[frogcase2002 393]

The xs xp950 are a little over 5" wide.

They would work but I would need so many of them lol

[frogcase2002 393]

Getting it bolted down

Ppi's fiting perfect

[frogcase2002 393]

Cant wait to get this playing!! Lol