Welcome to the IHoP v.2

[sandt38 448]

 

My Kauai coffee of the month flavor came. Was a gift from the W for V-day. This months flavor is rooster alarm. Super earthy tasting and acidic. Has been the darkest roast they have sent yet.

Always looking for the super dank coffees to try.

Have you tried jamaican blue mountain?

J

 

 

I assume a blueberry strain? There is some blue dream floating around here I just ran today. Didn't try it before I ran it. Real pretty flower. I find blueberries to be pretty, with heavy glands, but they veg me out.

 

We also have some trainwreck and purple diesel. The diesel looks amazing, but I have not tried it yet. A friend ran some saturday, so it shouldn't be long before I get my hands on some.

[sandt38 448]

I seen some out of state plates that had tags good for multiples of years. In Colorado tags are only good for a year. Drivers license only five years. Was ten on the license but the changed it. Now I'm curious if states issue license plate tags for multiples if years to everyone?

 

 

We were 1 on the tags and 8 on license until a few years ago. Now we are 1/5.

[Penguin4x4 1,761]

 

Well, shit. When I started the fire a few embers popped on my right leg. Didn't think anything of it until I get in the shower and patches of leg hair start falling off. Had to buzz it down with the hair clippers from the knee down to get it to look halfway decent. Oye.

Yes, because shaving 1/2 of your legs looks halfway decent...

 

 

1/2 of one leg would be 1/4 of my legs, wouldn't it?

[Penguin4x4 1,761]

That was you in the pic, of the fire in the pool penguin?lol

 

[Penguin4x4 1,761]

[Penguin4x4 1,761]

[j-roadtatts 1,129]

 

 

My Kauai coffee of the month flavor came. Was a gift from the W for V-day. This months flavor is rooster alarm. Super earthy tasting and acidic. Has been the darkest roast they have sent yet.

Always looking for the super dank coffees to try.

Have you tried jamaican blue mountain?

J

 

I assume a blueberry strain? There is some blue dream floating around here I just ran today. Didn't try it before I ran it. Real pretty flower. I find blueberries to be pretty, with heavy glands, but they veg me out.

 

We also have some trainwreck and purple diesel. The diesel looks amazing, but I have not tried it yet. A friend ran some saturday, so it shouldn't be long before I get my hands on some.

I have been around at least one plant of EVERY flavor you mentioned this week. The blue dream is a pretty one, mad curb appeal. My fav's at the minute are super lemon haze, hogs breath and triple D. The east coast sour diesel is always one of my fav's. Is a high energy smoke, but you better have all the thinking out of the way before hand.

[///M5 2,833]

Be there in 4 weeks. Won't look for him.

[Penguin4x4 1,761]

Hell you can probably hear him a mile away

[Penguin4x4 1,761]

RIP Casey Kasem

[ssh 924]

I got this idea of using two sensors and a raspberry pi to measure the kinematics of my dirt bike front suspension. The sensors would need to be about the size of a lighter or smaller and the suspension travel is about 10", so the resolution would need to be able to handle small changes in that range (not sure on exact resolution yet).

 

Anyone have any ideas on companies or places to look for such? So far I'm looking at Pasco and Vernier.

[ssh 924]

Bit bigger than what I was thinking but it might work: http://www.vernier.com/products/accessories/motion-encoder-cart-upgrade-kits/meu-vds/

[dem beats 1,223]

Being sick on vacation sucks.

Leave for Paris tomorrow..... I hope I feel a bit better.

[Julian 641]

I got this idea of using two sensors and a raspberry pi to measure the kinematics of my dirt bike front suspension. The sensors would need to be about the size of a lighter or smaller and the suspension travel is about 10", so the resolution would need to be able to handle small changes in that range (not sure on exact resolution yet).

 

Anyone have any ideas on companies or places to look for such? So far I'm looking at Pasco and Vernier.

arduino would be great

 

https://www.sparkfun.com/categories/80

[ssh 924]

 

I got this idea of using two sensors and a raspberry pi to measure the kinematics of my dirt bike front suspension. The sensors would need to be about the size of a lighter or smaller and the suspension travel is about 10", so the resolution would need to be able to handle small changes in that range (not sure on exact resolution yet).

 

Anyone have any ideas on companies or places to look for such? So far I'm looking at Pasco and Vernier.

arduino would be great

 

https://www.sparkfun.com/categories/80

 

That wouldn't work, I need position and time then I can derive velocity and acceleration. Working backwards with an accelerometer would have way too much error on it's own plus it would be recording acceleration from outside the suspension travel (e.g. the movement of the entire bike).

[ssh 924]

Otherwise that would be sweet.

[nem 2,019]

Hope all the dads had a great day with their family.

[Godsmack 361]

My Kauai coffee of the month flavor came. Was a gift from the W for V-day. This months flavor is rooster alarm. Super earthy tasting and acidic. Has been the darkest roast they have sent yet.

Always looking for the super dank coffees to try.

Have you tried jamaican blue mountain?

J

 

I assume a blueberry strain? There is some blue dream floating around here I just ran today. Didn't try it before I ran it. Real pretty flower. I find blueberries to be pretty, with heavy glands, but they veg me out.

 

We also have some trainwreck and purple diesel. The diesel looks amazing, but I have not tried it yet. A friend ran some saturday, so it shouldn't be long before I get my hands on some.

LOL it's actually a coffee. When I saw 'coffee of the month' it came to mind.

J

[Godsmack 361]

I seen some out of state plates that had tags good for multiples of years. In Colorado tags are only good for a year. Drivers license only five years. Was ten on the license but the changed it. Now I'm curious if states issue license plate tags for multiples if years to everyone?

In FL its up to two years. In AZ our drivers liscence was good until we are 65 but they ask (not demand) that you come in for an updated picture every 5 years.

J

[Godsmack 361]

http://www.gourmetcoffee.net/jamaican-blue-mountain-coffee.html?gclid=CPmW28ia_b4CFc9j7AodSCQAxA

[///M5 2,833]

I got this idea of using two sensors and a raspberry pi to measure the kinematics of my dirt bike front suspension. The sensors would need to be about the size of a lighter or smaller and the suspension travel is about 10", so the resolution would need to be able to handle small changes in that range (not sure on exact resolution yet).

 

Anyone have any ideas on companies or places to look for such? So far I'm looking at Pasco and Vernier.

can think of tons of ways do it if you spend thousands nothing if you dont

[MKader17 332]

Holy crap I'm still REALLY sore today. forearms biceps, delts, lats.

 

Biggest soreness is still when straightening my arms. Forearms and biceps in that area feel sooooo tight.

[///M5 2,833]

I got this idea of using two sensors and a raspberry pi to measure the kinematics of my dirt bike front suspension. The sensors would need to be about the size of a lighter or smaller and the suspension travel is about 10", so the resolution would need to be able to handle small changes in that range (not sure on exact resolution yet).

 

Anyone have any ideas on companies or places to look for such? So far I'm looking at Pasco and Vernier.

can think of tons of ways do it if you spend thousands nothing if you dont

I got this idea of using two sensors and a raspberry pi to measure the kinematics of my dirt bike front suspension. The sensors would need to be about the size of a lighter or smaller and the suspension travel is about 10", so the resolution would need to be able to handle small changes in that range (not sure on exact resolution yet).

 

Anyone have any ideas on companies or places to look for such? So far I'm looking at Pasco and Vernier.

arduino would be great

 

https://www.sparkfun.com/categories/80

That wouldn't work, I need position and time then I can derive velocity and acceleration. Working backwards with an accelerometer would have way too much error on it's own plus it would be recording acceleration from outside the suspension travel (e.g. the movement of the entire bike).

velocity >> acceleration @>> displacement

[///M5 2,833]

I got this idea of using two sensors and a raspberry pi to measure the kinematics of my dirt bike front suspension. The sensors would need to be about the size of a lighter or smaller and the suspension travel is about 10", so the resolution would need to be able to handle small changes in that range (not sure on exact resolution yet).

 

Anyone have any ideas on companies or places to look for such? So far I'm looking at Pasco and Vernier.

can think of tons of ways do it if you spend thousands nothing if you dont

I got this idea of using two sensors and a raspberry pi to measure the kinematics of my dirt bike front suspension. The sensors would need to be about the size of a lighter or smaller and the suspension travel is about 10", so the resolution would need to be able to handle small changes in that range (not sure on exact resolution yet).

 

Anyone have any ideas on companies or places to look for such? So far I'm looking at Pasco and Vernier.

arduino would be great

 

https://www.sparkfun.com/categories/80

That wouldn't work, I need position and time then I can derive velocity and acceleration. Working backwards with an accelerometer would have way too much error on it's own plus it would be recording acceleration from outside the suspension travel (e.g. the movement of the entire bike).

velocity >> acceleration @>> displacement

My Kauai coffee of the month flavor came. Was a gift from the W for V-day. This months flavor is rooster alarm. Super earthy tasting and acidic. Has been the darkest roast they have sent yet.

Always looking for the super dank coffees to try.

Have you tried jamaican blue mountain?

J

 

I assume a blueberry strain? There is some blue dream floating around here I just ran today. Didn't try it before I ran it. Real pretty flower. I find blueberries to be pretty, with heavy glands, but they veg me out.

 

We also have some trainwreck and purple diesel. The diesel looks amazing, but I have not tried it yet. A friend ran some saturday, so it shouldn't be long before I get my hands on some.

LOL it's actually a coffee. When I saw 'coffee of the month' it came to mind.

J

beans are to speakers whatvroasting is to installation

[///M5 2,833]

http://www.gourmetcoffee.net/jamaican-blue-mountain-coffee.html?gclid=CPmW28ia_b4CFc9j7AodSCQAxA

complete crap. If they don't publish a roast date DON'T buy it