Welcome to the IHoP v.2

[nem 2,019]

 

 

 

 

Pic's of the stainless appliances will have to wait until the maid come's Neal. LOL

 

How did you know I am damn good at house cleaning, all thats right I am married and too cheap to pay a maid.

 

That sounds about right. Yes maid is one of my many job tittles. lmao

 

 

New rule in this house; If you let something on my counter, I assume you missed the trash can and I will put it there for you.

 

I love that rule

 

 

Go easy on the little men though.

[nem 2,019]

There is a reason we call them Subarooch here. Rooch being a take off of roach ie cockroach. They keep getting buried in the snow and the lessies get pissed.

 

I will have to start calling Austin's that.

[j-roadtatts 1,129]

 

Jordon, I plan on sending you two of the protank mini's with two 1100 eGo-C Twist battery's on Wednesday.  A wall plug and charger cord of course. Do you plan on giving one to your girl or are they both for you? the reason I ask is so I know what case to get for you?

One would go to the girl so we can both quit.

Thanks again brother!!!!

J

 

Your welcome. Thanks for serving our country J.

 

I will send ya a few flavors and dif nic levels to try also. I know the flavor profile you like. What does your girl smoke? 

 

I am all about supporting my girls as they just moved from a 400 dollar a month location to the unit next door to our shop which is 2300 a month. You have been here, you know the demographic's of this area.

[nem 2,019]

He thinks that he is a snow racer with all wheel drive at times. Then his dad pulls his car out from being stuck.

[nem 2,019]

That is it! I am using my GCON 12's for midbass!

[j-roadtatts 1,129]

 

 

 

Guess who's going to look at an 09' RMK in the morning? You would shit if you knew the price am picking this up for Sean.

$3k

 

Is well maintained. 156 track, lots of mods. You sir are a good fucking guesser.

 

It isn't a ProRide, that is what it would go for here. Usually MN has about the best sled prices in the country so I just took a what would I pay.

BTW, next Oct you will be able to sell that for $4-4.5k. Feb is BY FAR the best time to buy. The sled I bought 3 years ago next fall I expect to make money on if I put it up for sale.

 

To many mods to even remember. If has been taken care of as stated the shelf life should be good to go for resale. And you know me, I always buy when the market is low, NOT when I need something.

 

 

The Wife don't know about the sled. lol I am going to look at it as soon as she leaves for her internship,  before I head to Denver. Will post pics later. May call you if i have any questions.

Which engine? What shocks (ie is it a Dragon or base?) A link to the ad would work too

 

700cc. Is my cousins sled so no link. I will get all the info and some pics. On my way there now!

[j-roadtatts 1,129]

That is it! I am using my GCON 12's for midbass!

I dare you

[///M5 2,833]

Pic's of the stainless appliances will have to wait until the maid come's Neal. LOL

 

How did you know I am damn good at house cleaning, all thats right I am married and too cheap to pay a maid.

That sounds about right. Yes maid is one of my many job tittles. lmao

 

New rule in this house; If you let something on my counter, I assume you missed the trash can and I will put it there for you.

I love that rule

 

Go easy on the little men though.

I would ONLY use that on my wife

[nem 2,019]

 

That is it! I am using my GCON 12's for midbass!

I dare you

 

 

All the kool guys are doing it.

[///M5 2,833]

Guess who's going to look at an 09' RMK in the morning? You would shit if you knew the price am picking this up for Sean.

$3k

Is well maintained. 156 track, lots of mods. You sir are a good fucking guesser.

It isn't a ProRide, that is what it would go for here. Usually MN has about the best sled prices in the country so I just took a what would I pay.

BTW, next Oct you will be able to sell that for $4-4.5k. Feb is BY FAR the best time to buy. The sled I bought 3 years ago next fall I expect to make money on if I put it up for sale.

To many mods to even remember. If has been taken care of as stated the shelf life should be good to go for resale. And you know me, I always buy when the market is low, NOT when I need something.

 

The Wife don't know about the sled. lol I am going to look at it as soon as she leaves for her internship,  before I head to Denver. Will post pics later. May call you if i have any questions.

Which engine? What shocks (ie is it a Dragon or base?) A link to the ad would work too

700cc. Is my cousins sled so no link. I will get all the info and some pics. On my way there now!

Mods are SPOOKY on a used sled. The 700CFI is a dog and a time bomb. There is a reason it was only available for a short while. $3k might be overpriced...

[///M5 2,833]

http://minneapolis.craigslist.org/wsh/sno/4303313090.html

Already has the Walker Evans and a fresh build by one of the best shock builders in the country.

[///M5 2,833]

2010 that you could buy for $4k, be cheaper if it weren't a dealer. Much better motor in this one. 700 carbed was the bomb, 700 CFI a mess.

http://minneapolis.craigslist.org/ank/snd/4296921212.html

[nem 2,019]

Our CL is usually full of shit!

[dem beats 1,223]

Shit. Poppa bear is gonna be late and I intended to be early.

:-)

[j-roadtatts 1,129]

 

 

 

 

 

Guess who's going to look at an 09' RMK in the morning? You would shit if you knew the price am picking this up for Sean.

$3k

 

Is well maintained. 156 track, lots of mods. You sir are a good fucking guesser.

 

It isn't a ProRide, that is what it would go for here. Usually MN has about the best sled prices in the country so I just took a what would I pay.

BTW, next Oct you will be able to sell that for $4-4.5k. Feb is BY FAR the best time to buy. The sled I bought 3 years ago next fall I expect to make money on if I put it up for sale.

 

To many mods to even remember. If has been taken care of as stated the shelf life should be good to go for resale. And you know me, I always buy when the market is low, NOT when I need something.

 

 

The Wife don't know about the sled. lol I am going to look at it as soon as she leaves for her internship,  before I head to Denver. Will post pics later. May call you if i have any questions.

Which engine? What shocks (ie is it a Dragon or base?) A link to the ad would work too

 

700cc. Is my cousins sled so no link. I will get all the info and some pics. On my way there now!

 

Mods are SPOOKY on a used sled. The 700CFI is a dog and a time bomb. There is a reason it was only available for a short while. $3k might be overpriced...

 

Sounds like I need to get you more info as I am not the savviest on sleds. After looking at the rental options locally I think buying and riding a few and selling is a smart choice.

[j-roadtatts 1,129]

Price is actually still TBD.

[///M5 2,833]

I was perhaps harder on the 700 than I should have been. Weight of an 800, speed of a 600 (or less) and had some serious mapping issues in the pc when first released. Once updated most of them seem "fine" but they aren't as robust as the 600 nor as quick usually.

The old 700 carbed models on the other hand were sweet. Way more power than the 600 and better fuel mileage too. I run those 700 pistons in my 600 making it the best of both worlds at 660cc. Rev's like a small block and has the bang of a big block. Modding a 600 to a 660 will set you back $2-3k though. Exactly why I was so excited to find one.

[nem 2,019]

 

 

 

 

Now for some finished pictures!

Before I spill any sailor on it.

Wow that would never happen.

Might replace the slides on the drawers depending on price.

Neal would dive and catch the rum tongue first before it hit the countertop!

 

I couldn't help it with all the talk of RUM!!

 

 

< has almost every album, because Parrot Head.

[nem 2,019]

Drawer slides narrowed down to two;

 

http://www.rockler.com/self-closing-accuride-3834-over-travel-slide

 

http://www.lowes.com/pd_380992-93052-TU9907SC2G22_0+1z0wkb4__?ipTrail=96.253.197.110&productId=50041766&pl=1&selectedLocalStoreBeanArray=%5Bcom.lowes.commerce.storelocator.beans.LocatorStoreBean%403da73da7%5D&currentURL=%3FNtt%3Ddrawer%2Bslides%26page%3D1&storeNumber=2229&Ntt=drawer+slides&facetInfo=22.0

 

I might run over to Lowes and pick one up to try it and if I don't like it return it and order the other.

[///M5 2,833]

I bought some at HD that look like the ones you highlighted from Lowe's. They work like SHIT compared to the ROckler ones. I may have bought slightly cheaper ones, but adjusting them to work sucked and they aren't smooth nor worth a shit in comparison.

Rockler has a nearly monthly 20% off coupon if you sign up for their newsletter/customer email thingee. It comes in the mail.

[nem 2,019]

I bought some at HD that look like the ones you highlighted from Lowe's. They work like SHIT compared to the ROckler ones. I may have bought slightly cheaper ones, but adjusting them to work sucked and they aren't smooth nor worth a shit in comparison.

Rockler has a nearly monthly 20% off coupon if you sign up for their newsletter/customer email thingee. It comes in the mail.

 

Just signed up. Thanks for the info, I will just order a pair today.

[j-roadtatts 1,129]

Is an 08'. Driving ATM but will post pics and info when I get to Denver

[nem 2,019]

Rockler dealer 26 miles away, listed on their site as a machine shop.

 

 They are looking to see if they have what I need.

[///M5 2,833]

Headquarters is really close to my house...

[///M5 2,833]

Be nice to know if it was a single ring or double ring engine. The doubles were more reliable. Pistons/rings are probably $270 or so for it.