Amp recommendation for SSA DCON 12"

[Trixton 0]

Looking for budget amplifier to power a 12" SSA DCON subwoofer SVC or DVC 4-ohm (1.2 cu ft sealed to spec). I would like a class d amplifier rated at about ~300w rms clean (give or take, this is a low power budget system). Any ideas?

[lithium 358]

ba gt 2125 http://www.sonicelec...cs-GT-2125.html

i would get the svc 4ohm and later if you add another dcon you can wire it to 2ohm at the amp for 600rms.

no need to worry about class d vs ab.

Edited January 13, 2013 by lithium

[Trixton 0]

ba gt 2125 http://www.sonicelec...cs-GT-2125.html

i would get the svc 4ohm and later if you add another dcon you can wire it to 2ohm at the amp for 600rms.

no need to worry about class d vs ab.

I have seen this amp, it looks great. For the wiring of the 2 svc 4-ohm subs to get a 2-ohm impedance, you connect amp (-) to sub1 (-) to sub2 (-) and then amp (+) to sub1 (+) to sub2 (+) ?

[ricksi30 923]

ba gt 2125 http://www.sonicelec...cs-GT-2125.html

i would get the svc 4ohm and later if you add another dcon you can wire it to 2ohm at the amp for 600rms.

no need to worry about class d vs ab.

I have seen this amp, it looks great. For the wiring of the 2 svc 4-ohm subs to get a 2-ohm impedance, you connect amp (-) to sub1 (-) to sub2 (-) and then amp (+) to sub1 (+) to sub2 (+) ?

Yes

[Trixton 0]

As for a wiring kit, what would you recommend? I'm really not sure of the relative quality/value of the different brands.

Edit: For the single sub setup, that is.

Edited January 13, 2013 by Trixton

[theo111 0]

Anything wikl work as long as its at least 8guage for the power and ground. you could definitwly find a cheap one for about 30-40 $ that will work