the gearbox CNC build

[ak11667 10]

started staining it today

[Dictator 39]

Looks sexy specially the stain par! video of the beast at work never seen a cnc machine work before!

[Quentin Jarrell 671]

Well since you are here trying to make money. These kits can be easily found online. By the looks of the parts this is more than likely just a kit you purchased and are now just going to use the machine you are building to copy the kit you purchased and sell them to others.

Please correct me if I'm wrong. I'm just assuming due to your post count.

[pro-rabbit 64]

Well since you are here trying to make money. These kits can be easily found online. By the looks of the parts this is more than likely just a kit you purchased and are now just going to use the machine you are building to copy the kit you purchased and sell them to others.

Please correct me if I'm wrong. I'm just assuming due to your post count.

Interesting, I never looked into those kits before. However, after your mentioning it(and doing some quick research) I can see where you could ask that.

[ak11667 10]

Well since you are here trying to make money. These kits can be easily found online. By the looks of the parts this is more than likely just a kit you purchased and are now just going to use the machine you are building to copy the kit you purchased and sell them to others.

Please correct me if I'm wrong. I'm just assuming due to your post count.

no this was designed by me, and i had the parts cut out on a cnc at a local cabinet shop, this is an organic design, that im still improving upon

and ive actually been a member since 2009, lurking, and i have been a competitor since 2007 in SS3-4 with db scores of around 155-158 using atomic APXX 18's and atomic 5k's

Edited October 26, 2012 by ak11667

[ak11667 10]

staining finished

Edited October 26, 2012 by ak11667

[ak11667 10]

been a while since last update, i was just waiting on parts, but my pc fried the controller board, my fault for buying chinese, so i got a new one coming, but i managed to get this video in before it fried

[StreetLegal 119]

Love it mann, looks like that terminator movie .

[ak11667 10]

I was having a good time with it, but then the boar went up in smoke and then 20minutes later my servers hard drive smoked too, today cost me just over 400dollars and 8tb of data

[StreetLegal 119]

I was having a good time with it, but then the boar went up in smoke and then 20minutes later my servers hard drive smoked too, today cost me just over 400dollars and 8tb of data

Damn that sucks, hope you get it all sorted out.

[ak11667 10]

got bored so i came up with a new logo

[ak11667 10]

mounted the router and the end mill today

ive also ordered a new controller board and i will be ordering a even better one later this week that will increase my accuracy drastically

[ak11667 10]