Opinions on gear wanted

[PhillBoy20XD6 0]

Lets say budget is around 5000, I want good SQ up front and I want to be able to colapse my chest when I want to, I have an amp for the components (audioque 120.4, one optima red top, (2) RE SX 12 subs, the rca cables and maybe enough 1/0 gauge to do the job)

[PhillBoy20XD6 0]

When I do searches for wire(s) so many topics come up that aren't even relavent its insane to try to sort through but if you know one off hand I have no problem reading just finding the material. Thanks again for your suggestions.

[ssh 924]

Wire is wire for the most part. Anything from kicker, stinger, streetwires, etc is fine. You may run into some cheaper wire that has a little less strand count, but 8awg wire is relatively inexpensive, so the previously mentioned is a safe bet.

[reelfish92 54]

Audio Technix 10 ga. speaker wire.

http://audiotechnix.com/products/speaker-wire/10-ga-speaker-wire

I posted those links to the Focal and Arc components only because some of the speakers listed were < $300 and better quality than the Alpine, maybe you did not look at all of them.

[lithium 358]

Audio Technix 10 ga. speaker wire.

http://audiotechnix....ga-speaker-wire

I posted those links to the Focal and Arc components only because some of the speakers listed were < $300 and better quality than the Alpine, maybe you did not look at all of them.

10 gauge speaker wire, are you out of your fucking mind?

[lithium 358]

14 or 16 gauge speaker wire from monoprice is a good deal. i also like their 'premium' RCA's for the money.

i've used kicker, stinger, and plain welding cable for power wire. i would recommend the welding cable if you need quite a bit of it (between power run and big three). kicker and stinger cable looks better but you could always techflex the welding cable.

[PhillBoy20XD6 0]

Is this the type of wire you would suggest for big three and amp connections http://weldingsupply.securesites.net/cgi-bin/spider.pl?304-1270||1|146||

[lithium 358]

yep, just compare $ per ft with other CCA wire. last time i looked it was the cheapest.

http://www.wireandsupply.com/category_s/57.htm

[PhillBoy20XD6 0]

thanks for the wire info, does anybody use Morel components I hear they are good and decent on price.

[ssh 924]

What speakers have you heard/owned in the past? Remember any specifics as to what you liked or disliked about each?

[PhillBoy20XD6 0]

I have a component set of Alpine's I like em personally not to harsh and decent on mids. I enjoy my RE's they have a ton of bass and are still crisp.

[PhillBoy20XD6 0]

Im thinking about up to $350 for front stage read some reviews maybe the Focal Polyglass, DLS OP6i, uh many to chose from

[PhillBoy20XD6 0]

I was looking but didnt find one... but does anybody know of a good enclosure builder in florida.