need help on single 10 sa d2 series box build ported

[krb1991 6]

Single cab 2003 tacoma. What i have to work with is length: 46 inches depth:11 inches height: 28 inches could go higher if need be and have bench seats so the sub would have to go in a bottom corner. Any help is much appreciated

[dbsupra 69]

Goals? Tuning? Music you listen to? Daily?

[krb1991 6]

Spl ofc rap alot. Lookin to hit as hard and deep as i can with one ten with limited space. Tuning around 33to 35htz

[krb1991 6]

Anyone?

[dbsupra 69]

Can you make it a rectangular box or does it need to be wedge shaped?

[ricksi30 923]

You have 46" of depth in a Tacoma? Will this be in place of the center console?

[krb1991 6]

Not depth lol. If only lmao. And yes wedged im sure would be better if someone would be kind enough to let me send a pic of the truck to their email or phone number im usin my new phone and dnt know how to upload pics yet.

[krb1991 6]

Also no knowledge on box ideas for a tacoma really need a design for this as my friend will be building this for me.

[krb1991 6]

Any help plz

[krb1991 6]

Any help plz

[dbsupra 69]

Single cab is hard to design unless you have it in front of you or have really solid measurements. Especially wedge shaped.

You can download Torres Calculator (free) and play around with it.

Displacement is .10 ft^3

Sub depth is 6"

Cut out diameter is 9 1/4"

Outside diameter is 10 1/2"

Shoot for around 33-35hz tuning and around 25 in^2 of port area

1-1.25 ft^3 net

Usually port firing to the side works best for a single cab.

Here is the link to the download http://www.mediafire.com/?haticgzfg9669f1

Edited August 28, 2012 by dbsupra

[krb1991 6]

Thanks for that very much. You that that one ten will shake things up a bit? Amp youd recommend? Was lookin at a jl amp does 500 rms at two ohms

[dbsupra 69]

It should sound good. But it's all about expectations and what you think is loud.

Amp will depend on budget and your electrical.

Haven't personally ran a JL amp before. Tons of options out there.

[krb1991 6]

What do u suggest for 500 rms and i got big 3 done and a new good bat under hood.