Jump to content
slow240sx

Dp 21" bandpass help

Recommended Posts

I got 2 21" death penalty subs. Anybody got any recommended 4th order box designs. I got 24 cu ft to work with. I was thinking of doing each sub in 2.5 to 3 sealed and 9 ported. And tuning the ported section to around 50 to 55. Let me know if you got any other ideas. I am looking for some better Spl numbers on music. Dont need it to play much under 30hz. Most stuff I listen too is around 35 or higher.

Share this post


Link to post
Share on other sites

Then just run a standard 4th order ported. Will yield what you are looking for better.

Share this post


Link to post
Share on other sites

^^ Yup.

Also, guessing at sealed volume and ported volume (and tuning) or simply choosing a ratio between the two without modeling is completely pointless...

Share this post


Link to post
Share on other sites

it wasnt a total guess. i got a friend with similiar setup and he was using 2.5 sealed and was working for him. He did change around the ported side numerous times and adjusted the loading wall to get it to work right. Was just seeing if anybody else out there was using these subs in a box like this and what their opinions were.

Share this post


Link to post
Share on other sites

A friend with a guess that is "working" for him is still a guess. And still will give up potential that you'll leave on the table had you just built a standard ported enclosure. The benefit you think you'll gain isn't going to happen.

Share this post


Link to post
Share on other sites

ive had the subs for 10 months or so. Ive built 2 seperate boxes for them and changed the port around numerous times. Its not that its not working, im just trying to get louder...

Share this post


Link to post
Share on other sites

ive had the subs for 10 months or so. Ive built 2 seperate boxes for them and changed the port around numerous times. Its not that its not working, im just trying to get louder...

And what exactly makes you think that the bandpass will do that for you?

What tuning did you try before? Port area? Volume?

Share this post


Link to post
Share on other sites

im not sure bandpass will be louder. Was just looking to try something different.

Share this post


Link to post
Share on other sites

right now, the box is 20 cu ft before ant displacements. both subs are in common chamber. Port is tuned to 34hz. The truck is peaking at 37hz. i got 330 sq in now and couple weeks ago i took away 45in of port and it peaked at 34. It sounded louder but went down 1 db on the meter

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×