Need help ASAP!

[Budah93 7]

I think my remote wire port is going out on my amp. Is this an easy fix? I have it rigged right now with a switch but would like to actually get it fixed. I need help guys

[The enD 467]

Please, explain exactly what seems to be the problem. The amp or the head unit has a problem with the remote wire? Why do you have it set up with a switch?

[Budah93 7]

i had the switched install because i just ran a small wire from the power to remote because the amp would only turn on if i did that. so since there was nothing to turn the amp off i installed a switch some my amp wasn't continuously on but i found a solution to the problem. I cut some new wire and it works perfect

[Impious 1,476]

If jumping it from the power wire fixed the problem, then the remote input on the amp wouldn't be the problem.....the wire itself or remote output on the HU would be.

[Budah93 7]

I found the issue. I part in the remote wire go cut under my side panels over time. so i just bought a new remote wire and works perfect!