remote wire help....quick

[natedizzle 0]

i was taking my rear deck lid out then i wanted to turn my system on and the subs didnt work...the little blue thin wire came out (the remote wire i think) and i need to know where to put it.its connected on the sub amp i just need to know where the other end goes....im pretty sure it doesnt go on my cap but i dont know alot about that.......thanks guys

[Eldorado 0]

There should be an imput marked REM or remote.

Usually its in between the power and ground wires.

[natedizzle 0]

ok well the part in the sub amp is fine its the other end thats loose...well the wire from the amp is only about a foot and a half long so i looked at the 4channel thats right beside it and saw that that amp has one too with some electrical tape to what looks like another wire...does it need to go where that is with the tape and the other wire?

[Eldorado 0]

Sorry, i misread your post.

The wire probably got pulled out from the 4ch's remote lead.

The remote lead to your sub amp was connected to your 4ch and then back to the H/U.

Just hook up the sub amps remote lead to the 4ch's remote lead.

Hook it up right and you wont need ghetto elecrical tape.

[natedizzle 0]

yeah i think that what i need tp do.....well i can think circuit city for all the great electrical tape....