AUDIOPIPE AP15001D 1500W MONO

[mase 0]

I have the Audiopipe pushing a ICON 12. Is that enough amp to push the sub. I have it hooked up right now and well it doesn't get much louder than my stock speakers.

[ricksi30 923]

I have the Audiopipe pushing a ICON 12. Is that enough amp to push the sub. I have it hooked up right now and well it doesn't get much louder than my stock speakers.

Then something is definitely wrong. How do you have it wired?

[mase 0]

http://img809.imageshack.us/img809/6084/ampwiring.jpg

[pmureika 31]

Need coil configuration D1 or D2 and ohms

[mase 0]

D2

[ricksi30 923]

D4 or D2 sub? Either way that is more than enough power to be loud. You have the sub wired in parallel correct? How did you set the gain? Are you using the bass knob?

[mase 0]

I have to turn everything up all the way to get it to even start moving it much.

[pmureika 31]

I have to turn everything up all the way to get it to even start moving it much.

[mase 0]

I have to turn everything up all the way to get it to even start moving it much.

that is how i have it

[pmureika 31]

I have to turn everything up all the way to get it to even start moving it much.

that is how i have it

Amp settings? And use a dmm to confirm ohms at the amp.

[mase 0]

I have to turn everything up all the way to get it to even start moving it much.

that is how i have it

Amp settings? And use a dmm to confirm ohms at the amp.

I have to turn everything up all the way to get it to even start moving it much.

that is how i have it

Amp settings? And use a dmm to confirm ohms at the amp.

I have everything turned up right now all the way, if not then don't really get anything out of it

[An-i-no 86]

It's out of phase somewhere. Flip the positive and negative wires.

[ricksi30 923]

Enclosure specs?

[mase 0]

Enclosure specs?

http://www.amazon.com/dp/B004X63LPI/ref=pe_175190_21431760_C1_cs_sce_3p_dp_1

that's what i had just lying around. i plan on building but haven't had anytime

[An-i-no 86]

Did you try reversing the polarity?

[mase 0]

Figured out the problem. I just got back from a deployment and somehow the ground wire got loose. So everything is working now. Next step is to upgrade electrical, lights dim pretty bad.