SAX-125.4 Prototype In (2012 Model)

[sundownz 197]

Here it is! Super small little amp

Without mounting feet included the new amps are sized as follows :

SAZ-1500D: 8.30” x 2.32” x 16.53”

SAX-125.4: 8.30” x 2.32” x 11.02”

Factory tested power as follows @ 1 % :

138x4 at 4

203x4 at 2

438x2 at 4

I'll be pretty busy for at least a few days but I will get my testing as soon as possible.

On to the photos with the 1500D v.3 and the 100.4D revision :

* Hard to tell but there are small holes in the board on the right for the fan on the opposite side of the board to breathe.

* 1500D v.3 and the 125.4 together

* WOW

* 99% of the crossovers... only lacking the 12/24dB slop switch. Fixed at 24 dB now.

[tkev77 0]

how much is the SAX 1500D??

[bassahaulic 155]

New 125.4 is rated @1% THD. 100.4 was at 0.1%THD.

[Shogen 325]

New 125.4 is rated @1% THD. 100.4 was at 0.1%THD.

This.... And I'm sure it is Class D... Also nice to have it fixed at 24db... But my HU does it... Right Drew??? We good

[sundownz 197]

The THD spec will be less at rated (hence the rating) -- at a still acceptable 1% the rating is exceeded. Simple really.

[nem 2,019]

Looks very nice. I am needing a small foot print 4 channel. What is the pricing going to be?

[Crescendo 0]

Im jelly

[onebadmonte 235]

Nice, loving the small footprint of the 125.4. Looking forward to pricing and availability.

[bassahaulic 155]

Rate the 100.4 @1%THD. I bet it's output jumps a good bit.

[Shogen 325]

Looks very nice. I am needing a small foot print 4 channel. What is the pricing going to be?

wild guess.. $400-475.... easily...

[edouble101 314]

Amp looks beautiful

Dreaming of a 125.6 now

[Scarface 23]

Damn looks like (2) 125.4 can fit the same space as (1) 100.4

New/smaller 2500 as well??

Edited May 3, 2012 by Dj_Scarface

[sundownz 197]

Yes... the 1200/2500/3500 are being re-done.

A new 2-channel 150.2 is in the works too.

[kkk4 3]

I was hoping for a powerful two-channel

800/1000 x 2 at 1ohm

minimum

[Notorious97200 339]

I was hoping for a powerful two-channel

800/1000 x 2 at 1ohm

minimum

Not so common !

Ihope the 125.4 will be available shortly. I already have one or 2 potential buyers. :-)

[Scarface 23]

Yes... the 1200/2500/3500 are being re-done.

A new 2-channel 150.2 is in the works too.

Kool... Gotta wait for the 2500

Edited May 4, 2012 by Dj_Scarface

[kkk4 3]

to work with 4-6 Neo-Pro for each door, it would be very useful!

[Kanaworm$ 292]

Im jelly

If I were you I would be jealous too! Sundown FTMFW!

[sundownz 197]

MAP is $500 on these vs. $385 on the old units.

For 25% more juice cost is up about 30% -- for that we are also getting metal gain and feature control POTs, much smaller sizing, 19v stability, tiffany RCA jacks, etc. All in all pricing is inline with what the extras are.

Expect pre-ordering soon on these and the 1500D v.3 models.

[sundownz 197]

There was some "concern" about the "high" rating of 1% THD in the factory spec that I posted originally... in any event as one can see on the full THD graph at the full rated 125 watts per channel we are at the sub 0.1% THD level. The power difference from 0.1 to 1.0 is in fact very insignificant. The 1% figure is the CEA-2006 standard measurement for reference.

[stealth 113]

not really on topic but when are you planning to get the single 4ohm neopro 10s in??? i would like to grab this amp and a few of those..

[sundownz 197]

not really on topic but when are you planning to get the single 4ohm neopro 10s in??? i would like to grab this amp and a few of those..

On the next production run; which I do not have an ETA for yet.

[sweendog 3]

Any idea what the pre order price will be on the 125.4?

Also do you know how far out the 3500s are for pre order? or at least a proto with some pics.

Edited May 11, 2012 by sweendog