-
Recently Browsing 0 members
No registered users viewing this page.
-
-
Recent Topics
-
- 7 comments
- 254 views
-
- 1 comment
- 216 views
-
- 1 comment
- 92 views
-
- 1 comment
- 80 views
-
- 3 comments
- 938 views
-
- 8 comments
- 1,854 views
-
-
-
Similar Content
-
By Jacob Eshack
Hey guys, I have e12 d2 I got a while back from Jacobs yard sale, I was thinking it would make a decent home theater sub, Just want some ideas on tuning/aero port/ down firing?/ If anyone can help out Id appreciate
-
By altoncustomtech
I searched the forum for any previous posts and information on this and came up empty handed so I apologize if this has been covered before. I finally talked to my buddy about the fiberglass stuff he was talking about that came ready to go, all you had to do was mold it around whatever it was you were using it on and let it cure. I found out that it actually cures in sunlight, or under UV light and has a wire mesh in it to help it hold it's shape.
It's not horribly expensive either. I found 1 sq.ft. pieces for $24 at Jeg's of all places which I didn't think was too unreasonable considering it's got everything a person needs to make it work. I would imagine that by the time a person bought enough resin, hardener, molding supplies, glass mat, etc. to do the little sail panel pods I'm wanting to do that it would cost more than $48. Maybe not, but for the location and shape these are going to have to have at least doing the main part of the pod would likely be easier with the Hyperfiber.
This is a subject I know VERY little about so some insight and help would be greatly appreciated by anyone who has fiberglass experience and especially experience with this product.
-
By mklett33
Hey all! Much like my previous threads I am starting another part of a build that will be completely documented through video. The support for the door pod series was awesome and I hope you guys enjoy this series just as much. Just like before I will be video taping every single step and editing all the information together to present to you. If you haven't seen my videos before I hope that you enjoy them and would love to hear what you think!
If you missed the seeing the door pods I mentioned above here is how they turned out:
http://www.youtube.com/caraudiofabrication'>
If you would like to see the in depth process of each step for how I made these door pods there is a conveniently organized playlist on YouTube at this link:
But enough about the door pods! Its time to get into our next project: The Fiberglass Under Seat Sub Box! Lets get started!
First a little about the system:
The Vehicle:
Chevy Duramax 2500 HD Extended Cab (Will add pics soon)
The Gear:
Alpine Type R's 6.5" Component Speakers
10" JL Audio W3 (Just kidding, I was planning on using this but have fallen in love with the DAD KMH-8, so we are using that instead)
Knukonceptz wiring
Wirecare.com wire protection products
Alpine MRP-M500
Alpine MRP-F300
If you are interested in a review for the KMH-8 or learning more, check this out:
I started with a concept, I knew that I wanted to build a box that would house both the amplifiers for the system and hide the wiring, but at the same time I wanted quick and easy access to them. The plan for how I am going to do this is difficult to explain, but as the build progresses it will become clear.
The box will also feature several inserts, I have entertained the idea of doing light up plexi on parts of the box. But I am not sure I want too. What do you guys think?
Anyhow here is the initial idea, I like to get stuff out on paper first, really gets the creative juices flowing:
http://www.youtube.com/caraudiofabrication'>
With the general idea framed out I started building. Pretty traditional stuff here but one of the coolest things I can teach you here is how I used a "Adjustable Curve" to get a perfect match with the floor contour of the vehicle. I also got the "Beauty Panel" frame trimmed out on the top of the box.
http://www.youtube.com/caraudiofabrication'>
To see the steps that got me to this point check out the video below!
Well, thats it for now, off to a good start, I already have the bottom fiberglass molded, just need to edit the video, so you guys have to wait! Let me know what you guys think, wondering what direction you think I should go with the insert pieces, back lit, metal mesh, etc.
-
By mklett33
In this tutorial write up we will be covering how to create some awesome door panel pods that will add a custom look to your install, allow you to integrate multiple speakers into a door panel, and allow you to control the mounting position of the speakers. Note that while these are in fact door “pods” that are not actually permanently bonded are made as part of the door panel itself, there are many techniques within that could be used if you were in fact planning on creating door “panels” from scratch. Let’s begin!
Step 1: Woodwork and Templates:
In order to have a good foundation for our door pods we want to make awesome speaker rings. The video above covers many of the details needed. Take your time with this step as clean woodwork is essential to having a good foundation to create the door pods.
Tools needed:
Router
Jig Saw
Jasper Circle Jig
Flush Trim Bit
Rabbeting Bit
Foam Tape
LTP
Stapler and Staples
Upon completion you should have great looking speaker templates that are prepped for molding into the panel.
Step 2: Reverse Mounting Speakers:
This step is not essential in terms of design, but it is important to have a plan for exactly how the speakers will mount. The last thing we want is to make these amazing door panels and use wood screws to secure the speakers that will become loose with time. Take a look at the fasteners we used here instead.
Tools Needed:
Drill and Bits
Marker
When complete your speakers will be ready to mount securely to your pods.
-
-
Recent YouTube Posts
