Team SSAudio 2011 Mustang

[ricksi30 923]

yeah it is. it pooped out on me.,first the pico then one channel had horrible static and one stopped working.

Same here lol. I like the sound of the Kenwood better honestly. If it had the crossovers I would definitely like it more than the Pioneer decks.

[Sencheezy 689]

looking good

[KyleBrown 121]

that's crazy bright. How do you like those tweets?

great for vids :-) honestly I like them. they take a lil bit of tuning to make them sound good but when you get it right its nice. they sounded a whole lot Better when I had my 880prs.but.they still sound good on the kenwood

I'll keep that in mind. Thanks

[16K 159]

[Julian 641]

got a bit of work done today!

FIshing the bolts through.

Tyler unbolting the muffler.

What I'm doing.

ANd what it's all for.. A trailer basket will hold up to 150 Lbs in extra stuff while traveling

The final result.. should be great for going places.. Has a 46x28.

I received my 16ft of "cool white" LED strops

The two strips for the port

Tinning the wires

All soldered up and heatshrinked

both done

All lit up and pretty, I need to repaint the port to make it look pretty again.

[Sencheezy 689]

Looking good. When are you going to seal it off?

[Julian 641]

It was a good 2db loss lol, so probs never. I'm going to trim it out later but its a lot of work

[Julian 641]

The "Gramma Trailer" as Senchez calls it was a Success! Made traveling 100x easier and more comfortable.

[porkchop 304]

[Aaron Clinton 2,372]

Good thing you have 300hp to pull all that weight.

[16K 159]

Good thing you have 300hp to pull all that weight.

Too bad its a v6 though

[Sencheezy 689]

The "Gramma Trailer" as Senchez calls it was a Success! Made traveling 100x easier and more comfortable.

Hahahaha! It has its uses!!

[KyleBrown 121]

Good thing you have 300hp to pull all that weight.

Too bad its a v6 though

If it's the 3.7, it should do fine imo.

Looks good Jules

[Julian 641]

Considering a Change in the Mustang..

[jcarter1885 995]

Do tell

[stevemead08 752]

Considering a Change in the Mustang..

I'm here for you buddy...

[Aaron Clinton 2,372]

Keep us updated.

[Julian 641]

Little update!

 

 

What I'm working with 3/8" x 1 1/2" Aluminum bar.

Ensuring that all the holes line up properly

One down.. Many to go

More done..

The final product.. I know they're not perfectly  centered.. But I like my overall job with the tapping. There are a total of 15 tapped holes on each side for my M8 X 1.25 bolts.

Close up..

Starting to get them in..

All the 1/0 connected and bolted down

All neat and clean!

[Julian 641]

Oh, and why the fuck are Metric bolts so expensive? I spent more on the bolts than I did the Aluminum.

[Sencheezy 689]

Very nice sir

[Julian 641]

thanks mang

[shizzzon 461]

Oh, and why the fuck are Metric bolts so expensive? I spent more on the bolts than I did the Aluminum.

Don t use metric..  I used 38-24 on all my custom blocks.

[swift 501]

I started to make bars for my die hards and said fuck it, and ran jumpers. I have 2 aluminum bars siting in garage. I bought 1/2 in bars and couldn't get threads to catch, oh well. Looks good

[shizzzon 461]

Good thing you have 300hp to pull all that weight.

I have ~1300lbs extra in the vehicle on just 161hp stock.

 

No, tranny issues whatsoever.

 

All i need is new brakes at this point and it's fine.

 

The added weight requires a different approach on taking off without squealing tires but i'm used to it now.

[Julian 641]

I started to make bars for my die hards and said fuck it, and ran jumpers. I have 2 aluminum bars siting in garage. I bought 1/2 in bars and couldn't get threads to catch, oh well. Looks good

It worked out pretty well.. I used the posts to mark where the holes needed to go by tapping with a hammer to make an indentation. Then used the drill press to carefully tap the bar. 

I'm pretty happy with what came out.

The bars make it 500x easier to wire everything up instead of having 3-4 terminals on a single post.