Bl with what amp?

[Vieceli 0]

I just ordered one 12 1ohm BL, I'm thinking a xtx 3000.1 amp, pushes 1400 arms at one ohm. What do y'all think?

[Hzd Skizzy 27]

then you ordered the wrong voice coil config. You need dual 2 ohm to wire to 1 ohm on an amp. and Dual 1 ohm wires to 2 ohm on an amp. Find an amp that does power at 2 ohm or be fast and switch up your order.

[16K 159]

then you ordered the wrong voice coil config. You need dual 2 ohm to wire to 1 ohm on an amp. and Dual 1 ohm wires to 2 ohm on an amp. Find an amp that does power at 2 ohm or be fast and switch up your order.

lol +1... if you need a amp that does rated at 2 ohms look into the kicker zx series...

[Hzd Skizzy 27]

then you ordered the wrong voice coil config. You need dual 2 ohm to wire to 1 ohm on an amp. and Dual 1 ohm wires to 2 ohm on an amp. Find an amp that does power at 2 ohm or be fast and switch up your order.

lol +1... if you need a amp that does rated at 2 ohms look into the kicker zx series...

Yes and correct me if I'm wrong but some fosgate amps do same power at 1 ohm and 2 ohm. Alpine amps as well.

[Shogen 325]

JL also

[Vieceli 0]

I'm trying not to spend over 400 on an amp. I miss read the info on that amp, thanks for correcting me.

[StreetLegal 119]

According to the specs on that amp it does 1000 watts rms at 2 ohms, If you can change the order on your subwoofer to a dual 2 ohm instead of dual 1 ohm, then you would have better option on buying good amp (sundown sax 1200 D) for the budget you mention. JMO

[pmureika 31]

Look in the classifieds there is a sax1200d for sale.

[Notorious97200 339]

1000 w at 2 Ohms is enough for a BL.

OP, you can keep this amp if this is the one you like.

But a DVC 2 sub would be better to find a good amp that accept 1 Ohm loads.

[Vieceli 0]

Sound stream rub1 2500D.?.I might upgrade an get another eventually,