Jeep Cherokee 2 SA-15s

[basshead7890 128]

This is a build I'm doing for a friend.

2000 Jeep Cherokee

2 Sundown SA-15

Hifonics Brz-1200.1d

Cadence 4awg wire kit

Everything should be arriving sometime this week.

7.31ft³ @31.24hz 101.72in² port area

The box ended up being bigger than I expected, I misread the torres box calculator and is .75inch taller.

I still have to glue down the top baffle,but I'm going to wait to make sure the subs fit.

Thats it for now until the equipment arrives.

Edited March 5, 2012 by marq7890

[BTL15 1]

I love your cheap wooden circle guide. I might have to use that for my next build. What bit did you use to cut the circle?

[basshead7890 128]

I love your cheap wooden circle guide. I might have to use that for my next build. What bit did you use to cut the circle?

Spiral Mortising Router Bit http://www.harborfreight.com/3-piece-spiral-mortising-router-bit-set-66733.html

[jcarter1885 995]

nice start so far, anything else getting installed besides sub stage?

[ShagggDiesel 25]

What are those clamps you're using for the corners? Those look sweet! I need a couple of those.

[basshead7890 128]

nice start so far, anything else getting installed besides sub stage?

yeah, today he told me he is going to buy a cd player

What are those clamps you're using for the corners? Those look sweet! I need a couple of those.

3" Corner Clamp http://www.harborfreight.com/3-inch-corner-clamp-1852.html

[Frostedflakejake 148]

You have much, much more port area than I...

This is all too familiar! My SA 15 box is, IIRC, 7.3 net cubic feet!

Looking good!

[basshead7890 128]

Bought the subs from Kevin at Skar Audio

The big 3

Edited March 8, 2012 by marq7890

[jonbearsmt 919]

came out looking great.. bet it sounds great too!! good build! great job!

[16K 159]

Love the box... nice work!

[mickey95 0]

nice box, do you have any voltage problems?

[Sencheezy 689]

Got Port?

[SPL_Man 20]

personally i like symmetry so i wud have put the port in the middle but still that came out looking really nice

[Shogen 325]

looks great!!!

[bassahaulic 155]

Looks real good man.

I love all the port!

[basshead7890 128]

nice box, do you have any voltage problems?

Not that I know of, he say it stays a 14volts but I don't know how accurate the stock volt meter is in the cluster panel

personally i like symmetry so i wud have put the port in the middle but still that came out looking really nice

Looking back on it now, I would have done it different too like a kerfed port on the bottom.

[sefugi 166]

Nice work on the enclosure, looks clean!!

[Dictator 39]

looks clean and loud