looking for a good 4channel.....

[vladd 26]

I didn't notice that, oh well, i've got some stuff i'd LOVE to trade for some of that entry level stuff

[ragnaroksq 0]

ragnaroksq is a prime example of what you can do with small but good power

<{POST_SNAPBACK}>

Indeed, but ragnaroksq called:

Zapco I-450 Amplifier

Zapco I-2100 Amplifier

Zapco I-5.2 component set

Zapco I-6.2 component set

Arc Audio KAR 10d subs

Entry level.

<{POST_SNAPBACK}>

lol...Zapco considers the i-force products entry level

[ragnaroksq 0]

well ive got the tweets in my doors by the handle and the mids in the stock location and im not doing any of the install,i might try and do the door deadening on my own when i have time im just not sure what to use that wont clean my wallet out....

<{POST_SNAPBACK}>

my tweets are located in the same area, but i have a 5.25 midrange in the kick panel and 6.5 midbass in the door. dave's car sounds good without the kicks. if you don't want to build kicks, maybe your installer could angle your door speakers. that would give you better sound.

Edited March 2, 2006 by ragnaroksq

[ragnaroksq 0]

I didn't notice that,  oh well,  i've got some stuff i'd LOVE to trade for some of that entry level stuff

<{POST_SNAPBACK}>

when will the system be finished vladd?

[vladd 26]

before i'm dead...maybe

Plans are to try to get some work done on the doors over spring break, i'd love to actually get them ready for the speakers. i've just got too much on the table for 1 week, so i probably won't get around to much of anything

[ragnaroksq 0]

before i'm dead...maybe

Plans are to try to get some work done on the doors over spring break, i'd love to actually get them ready for the speakers.  i've just got too much on the table for 1 week,  so i probably won't get around to much of anything

<{POST_SNAPBACK}>

good luck with the doors. my doors still rattle lick chit

[vladd 26]

rattling isn't going to be my problem, i just have no way to seal them off, and even mounting a ring anywhere is going to be difficult.

[Aaron Clinton 2,372]

ragnaroksq is a prime example of what you can do with small but good power

Indeed, but ragnaroksq called:

Zapco I-450 Amplifier

Zapco I-2100 Amplifier

Zapco I-5.2 component set

Zapco I-6.2 component set

Arc Audio KAR 10d subs

Entry level.

lol...Zapco considers the i-force products entry level

you and I both know, anything from companies like Zapco and US Amps and ZED that are called "entry" level are not really entry, they challenge most average companies mid level and some high level lines, damn it, maybe when I come back down for court I can hear your car

[Aaron Clinton 2,372]

rattling isn't going to be my problem, i just have no way to seal them off, and even mounting a ring anywhere is going to be difficult.

you could fire them into the trunk and seal the face of the box to the opening into the trunk, I have seen a good number of trunk SPL installs that way

[vladd 26]

i meant my door components, and why do you have to go to court? please tell me it was something stupid, that would make my day (because you seem like one of the most responsible people i've met)

[Aaron Clinton 2,372]

i meant my door components, and why do you have to go to court?  please tell me it was something stupid,  that would make my day (because you seem like one of the most responsible people i've met)

got pulled over coming to daves house on sunday looking for Exit 119C, everything appeared to still look as if I was on a highway, espically with the other cars near me doing the same speed, then as I am spinning my head around to look for the exit sign, POS hidding under the over pass pulls out and gives me a ticket for speeding in a residential,

super dave is looking into it for me, I am beyond pissed, and there is no way I am going to pay the serious fine, let alone just let this POS think he can sit back and expect me not to come to court and I will get nailed with 2 points on my record

[ragnaroksq 0]

i meant my door components, and why do you have to go to court?  please tell me it was something stupid,  that would make my day (because you seem like one of the most responsible people i've met)

<{POST_SNAPBACK}>

hellraiser in hiding lol

[ragnaroksq 0]

ragnaroksq is a prime example of what you can do with small but good power

<{POST_SNAPBACK}>

Indeed, but ragnaroksq called:

Zapco I-450 Amplifier

Zapco I-2100 Amplifier

Zapco I-5.2 component set

Zapco I-6.2 component set

Arc Audio KAR 10d subs

Entry level.

<{POST_SNAPBACK}>

lol...Zapco considers the i-force products entry level

<{POST_SNAPBACK}>

you and I both know, anything from companies like Zapco and US Amps and ZED that are called "entry" level are not really entry, they challenge most average companies mid level and some high level lines, damn it, maybe when I come back down for court I can hear your car

<{POST_SNAPBACK}>

let me know when you will be in the area. i will try to make it back down to dave's house. i still have half of the eq to tune once i can eliminate the rattle in my doors.

[Tirefryr 1,742]

rattling isn't going to be my problem, i just have no way to seal them off, and even mounting a ring anywhere is going to be difficult.

I have some rings I made for my buddy's Stratus lying around if you want them. Just a simple drop in.

[Eldorado 0]

I wouldnt call the Xterminator line entry level at all...haha

Denim, take it easy on the NOS...jeezz

[Aaron Clinton 2,372]

ragnaroksq is a prime example of what you can do with small but good power

Indeed, but ragnaroksq called:

Zapco I-450 Amplifier

Zapco I-2100 Amplifier

Zapco I-5.2 component set

Zapco I-6.2 component set

Arc Audio KAR 10d subs

Entry level.

lol...Zapco considers the i-force products entry level

you and I both know, anything from companies like Zapco and US Amps and ZED that are called "entry" level are not really entry, they challenge most average companies mid level and some high level lines, damn it, maybe when I come back down for court I can hear your car

let me know when you will be in the area. i will try to make it back down to dave's house. i still have half of the eq to tune once i can eliminate the rattle in my doors.

I will know in the next day or so when I am coming back down

[natedizzle 0]

ok so here is a list of the 4channels i have been thinking about... let me know which ones would be better.

pg xenon 200.4

tsumani db440

hifonics (not sure what model)

mb quart raa4200

orion 800.4

ok so i know there is more this is just off the top of my head so if you know anyother good ones let me know.

[natedizzle 0]

avionixx and tsunami are pretty much the same amp arent they??...anyways i can get a avionixx 800.4 125x4 for 190 shipped or the tsunami 440 which is 75x4??.....would these be worth getting? mind you that these are both refurbs.or should i look at other options? i would just get a mbq raa4200 or the xenon 200.4 but i think i need to save alittle bit of money so i can get a better quality sub amp,or should i just save up and get the better 4 channel??

[Aaron Clinton 2,372]

Nate, save some money and not lose any quality and grab a US Amps IS 4080 from flakko, already been some good reivews on them and the price is right, and oh yeah they are not refurbs

[///M5 2,833]

Nate, save some money and not lose any quality and grab a US Amps IS 4080 from flakko, already been some good reivews on them and the price is right, and oh yeah they are not refurbs

Big time no brainer!!

[natedizzle 0]

well whats the specs on that amp???.....i also am thinking about the autotek xs900.4 for $200.you guys think thats a good deal too?

[Eldorado 0]

new autotek is hifonics

old autotek is better 5600X ftw !

[natedizzle 0]

so the autotek xs900.4 would be that great??...hmmm im still leaning at this or the mbq cause i dont know alot about that us amp yet....

[natedizzle 0]

i meant that i was asking if the autotek WOULDNT be that great....

[natedizzle 0]

is it the 4080 or the 4085 that i saw in the group buy??....whats the specs???