RL-i10 advice please

[tRiGgEr 0]

Any input would be appreciated. In the market for some new drivers. Since I've had so much success with the RL-i8, I thought I would try out the 10s .

Option 1.) 3 RL-i10's. Sealed .48ft^3 net volume each. 433 watts rms each. Orion 1200d @ .67ohms.

Option 2.) 2 RL-i10's. Sealed .53ft^3 net volume each. 650 watts rms each. Orion 1200d @ 1ohm.

Main question is about the Orion. Will it be stable @ .67ohms. I don't know how impedance rise effectively changes in a small sealed box. I don't see the enclosure space difference of .05ft^3 effecting much low end output.

Any thoughts? Advice? Opinions? Love to hear what you guys would suggest

Thanks

Adam

[Aaron Clinton 2,372]

the trio would be fun, as for load on the amp, shane might know best

[///M5 2,833]

3 would be yummy.

[Aaron Clinton 2,372]

the trio would be fun, as for load on the amp, shane might know best

just fired him an email

[tRiGgEr 0]

the trio would be fun, as for load on the amp, shane might know best

<{POST_SNAPBACK}>

just fired him an email

<{POST_SNAPBACK}>

Thanks Denim.

[tRiGgEr 0]

I'll try and ask this @ Ca.com good luck with getting an answer eh lol.

Can't view the forum from work anymore, so that put a damper on asking a couple questions...

[///M5 2,833]

But you will get a reply like: Amp stable at .67ohms, what are ohms? It'l work just do it and SS huh? wtf is that crap, get a type ARRRRR!

[Aaron Clinton 2,372]

But you will get a reply like: Amp stable at .67ohms, what are ohms?  It'l work just do it and SS huh? wtf is that crap, get a type ARRRRR!

lolergoobers

[tRiGgEr 0]

But you will get a reply like: Amp stable at .67ohms, what are ohms?

Edited February 24, 2006 by tRiGgEr

[joebangaa 0]

you know, i was thinkin about splurging on some subs too and considered getting three rl-i 10"s as well (in addition to the svc 8er i'm gonna pick up).. i can't help but try and compare them to mainstream subs...what do you guys think these compare to? from what it seems they could easily own a 10w3v2 in SQ and SPL (i have access to three of these as well hehe)...

[bimma85 0]

you know, i was thinkin about splurging on some subs too and considered getting three rl-i 10"s as well (in addition to the svc 8er i'm gonna pick up)..  i can't help but try and compare them to mainstream subs...what do you guys think these compare to?  from what it seems they could easily own a 10w3v2 in SQ and SPL (i have access to three of these as well hehe)...

<{POST_SNAPBACK}>

I've never heard an rli so I cant say. I think you should get em and do a review for us though .

[Aaron Clinton 2,372]

I have never heard an RL-i but I have beat the crap out of my TC2+'s and they love it and sound smooth

[HCCAfan 3]

the 1200d will do 1/2 ohm daily.

[///M5 2,833]

But you will get a reply like: Amp stable at .67ohms, what are ohms?  It'l work just do it and SS huh? wtf is that crap, get a type ARRRRR!

Serious lol.

I'm wondering what the actual DC resistance will be @ the amp. I know it will not be a perfect .67 and how much it rises when the VC are heated...

Maybe I'll just have to pick up the 3 and test it. If 3 do not work out, I can always use one in my HT setup

Sorry, didn't mean to mock on you just crapaud. If Shane ^ says it is 1/2ohm stable you are GOOD TO GO!

[tRiGgEr 0]

the 1200d will do 1/2 ohm daily.

<{POST_SNAPBACK}>

Thanks a bunch. You made my decision easier