Jump to content
jekeke

Need Help With Difficult Enclosure

Recommended Posts

I've got some complicated problems.

Ok I'll just start with the maximum enclosure Size/Subwoofer Recommendations and we'll go from there. Anything marked with a * is a question/possible problem, please check these spots out.

Woofer Recommends This:

2-2.5 Cubic Ft Per Woofer

50" Squared Port Area - 79" Squared Port Area Depending on Box Size.

I would like to tune to 33 Hz I think that will sound good?*

Enclosure Maximum size and WHY:

36" Exterior Width

30" Exterior Height

14" Exterior Depth

Woofer Direction:

Subwoofers mounted on top.

Port Direction:*

There is a door on one end of the enclosure and a seat on the other other end of the enclosure, there is a seat behind the enclosure. The only place the port can possibly fire from is the bottom front of the box.

The port must not get in the way of the woofers obviously

Make sure you minus .40 Cubic Ft for Bracing/Flush Mount Baffle* (Talk to me where braces go if you are adding a picture)

Rounded Port Corners.

Let me know what you come up with thanks If its good enough and I end up using it I'll throw you $20 donation! Let me know whats up.

Share this post


Link to post
Share on other sites

A little on the vague side. I don't know what subs you are using, how many, or how much power. No idea what goals you have or what kind of music you listen to or what it is even going in.

Please provide more info if you want any kind of real help here.

Edited by dbsupra

Share this post


Link to post
Share on other sites

A little on the vague side. I don't know what subs you are using, how many, or how much power. No idea what goals you have or what kind of music you listen to or what it is even going in.

Please provide more info if you want any kind of real help here.

Subwoofers: Incrimnator Audio Lethal Injection 12 Inches, Two of them. Dual 2 Ohm Voice Coils

Amplifier: 1000 Watt JL Audio 1000/1v2 Puts out probably around 1000-1200 wrms at any impedance between 1.5-4 and puts out about 500-600 wrms at any impedance between 1.5-4

1200 Kinetik Battery near amp with Fuse between it and amp.

Stock Battery

0 Gauge under the hood Wiring.

Enclosure Specs:

http://www.incriminatoraudio.com/update/index.php?page=3&cat=2

Older Subwoofer Specs:

http://www.incriminatoraudio.com/li.htm

Updated mounting depths:

http://www.incriminatoraudio.com/update/index.php?page=2&product=2

Rap/Techno 95% of the time, once in a while a rock song will come on. Thats why I was thinkin 33Hz tuning, maybe lower or higher? What do you think.

Truck space kind of looks like this

http://images.thecarconnection.com/lrg/2009-dodge-ram-1500-2wd-quad-cab-140-5-slt-rear-seats_100257728_l.jpg

Except the double back seat is folder up and there is a flat panel folded down for the box to sit on.

Edited by jekeke

Share this post


Link to post
Share on other sites

So what your saying is you want the box to sit on top of the seat in the back of a extended cab truck? Why not just face sub woofer over the center console and face the port up?

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×