What is the recommended cuft for a sealed 15" Flatlyne ?

[SPL_Man 20]

hi

I wud like to buy a 15" IA Flatlyne for daily sq use but i notice there isnt any IA Recommended Enclosure Sizing for it on their website or on here - can nick or anybody at IA or here give a recommendation for a very flat sealed response ?

i need to know before i order it

space & amount of amp power is not an issue , those will be dealt with accordingly afterwards

thanks guys

[S.DeYoung 968]

Same as the lethal injections.

[SPL_Man 20]

hmm really ?

where is the product support here ? because i posted this over a wk ago

[NB50 206]

It was answered ten minutes after you posted.

[ia2 21]

Sorry I thought it was already answered too....follow the same box recommendations for the LI series

[SPL_Man 20]

well i couldnt just take the very 1st response & run with that - i needed a few more responses to confirm so i cud make a better informed decision : thanks guys

sort of strange how yall say the LI & FL box specs wud be similar seeing that their motors are completely different & 1 is rated 600wrms while the other is 750wrms

if anybody still want to chime in ur welcome to do so

Edited January 24, 2012 by SPL_Man

[MikeMartel 64]

Yes.

[95Honda 486]

Just model for Qtc around .8-.9 if you don't want to go by everyone's info.

[S.DeYoung 968]

I have had personal experience with the flatlynes. Follow IAs recommendation and you will not be disappointed.

[w00tah 5]

well i couldnt just take the very 1st response & run with that - i needed a few more responses to confirm so i cud make a better informed decision : thanks guys

sort of strange how yall say the LI & FL box specs wud be similar seeing that their motors are completely different & 1 is rated 600wrms while the other is 750wrms

if anybody still want to chime in ur welcome to do so

Considering IA2 is an IA worker, I'd think he'd know what he was talking about

[ia2 21]

well i couldnt just take the very 1st response & run with that - i needed a few more responses to confirm so i cud make a better informed decision : thanks guys

sort of strange how yall say the LI & FL box specs wud be similar seeing that their motors are completely different & 1 is rated 600wrms while the other is 750wrms

if anybody still want to chime in ur welcome to do so

Most all of ours subs use very similar box recommendations, and it didn't happen by accident....lol. and yes I am the guy that builds these things by hand, so I promise you can trust my recommendation you won't be disappointed

[SPL_Man 20]

ok cool , didnt know u were associated with IA

what is the biggest sealed in ur experience would u recommend for it though ?

[ia2 21]

ok cool , didnt know u were associated with IA

what is the biggest sealed in ur experience would u recommend for it though ?

Well our largest recommended size is 1.4 cu ft sealed. How much power do you plan on running?

[SPL_Man 20]

"""""Lethal Injection Series 15

Sealed 1.5 cubes - 2.0 cubes """"

here says 2.0 cuft max

i was thinking about using this amp (Xi1500.1)

http://www.exileaudio.com/products/ximonoblocks/?tab=specs

estimating from its fuse rating it shud be doing close to 1100wrms

[ia2 21]

I am sorry I gave you 12" box size...wooops! If you are going to be using 50% more than rated arms power, I would recommend building your box around 1.5 cu ft.

[SPL_Man 20]

cool thanks

[Cygnus 0]

Hey IA2, I got a similar question. Do you think a 2.7 cuft sealed box is way to big for a Lethal 15" with a Crossfire VR401(500wrms)?

[ChevyBoy95 15]

well i couldnt just take the very 1st response & run with that - i needed a few more responses to confirm so i could make a better informed decision : thanks guys

sort of strange how ya'll say the LI & FL box specs would be similar seeing that their motors are completely different & 1 is rated 600wrms while the other is 750wrms

if anybody still wants to chime in your welcome to do so

[SPL_Man 20]

^^ contributing to the actual topic would have been more beneficial instead of correcting my short-hand internet lingo

[ia2 21]

Hey IA2, I got a similar question. Do you think a 2.7 cuft sealed box is way to big for a Lethal 15" with a Crossfire VR401(500wrms)?

I would shrink that box down a little if you can. 2 cubes is the Max sealed recommended box size for the li 15. With that being said , since you only have 500 rms, its not going to hurt if the box is slightly bigger than recommended size.....just reduce it by half a cube or so and it will be fine.

[Cygnus 0]

Hey IA2, I got a similar question. Do you think a 2.7 cuft sealed box is way to big for a Lethal 15" with a Crossfire VR401(500wrms)?

I would shrink that box down a little if you can. 2 cubes is the Max sealed recommended box size for the li 15. With that being said , since you only have 500 rms, its not going to hurt if the box is slightly bigger than recommended size.....just reduce it by half a cube or so and it will be fine.

Thanks man!!