IDMAX 12's

[russelthalovemuscle 0]

So I just ordered a couple IDMAX 12's. I had heard your not supposed to give them the whole 1000rms each. So my question is how much do the like? Im thinking of throwing them on a Sundown SAZ 1500 @1ohm. Im guessing about 750rms a piece. Would that be pushing it or should I be fine?

Also I was wondering if anyone here has experience with these subs and how do you like them? Have you hit good term lab numbers with them? I know they are SQ subs but i know they can get loud too.

[Aaron Clinton 2,372]

Set your gains correctly, and put them in a proper enclosure, and you should be fine with 1000 watts.

[Tirefryr 1,742]

They have a VERY tight gap and the slightest bit of coil rock will cause damage. Most of the issues you may have read about them have been due to abuse.

[duanebrow 6]

Set your gains correctly, and put them in a proper enclosure, and you should be fine with 1000 watts.

+1 You need the right enclosure, what did you have in mind?

[duanebrow 6]

Set your gains correctly, and put them in a proper enclosure, and you should be fine with 1000 watts.

+1 What enclosure/box are you planning for these.

Edited January 6, 2012 by Duane