I need a box Builder

[RodriguezMiguel 0]

i need box builder for my subs this is what i need

Here's the box info.

Sealed box

2.4 cubic feet

Line box with ~3" thick fiberglass insulation.

Subs faced up.

if anythin hit me up here or [email protected]

[Tirefryr 1,742]

Well, that should be easy.

[RodriguezMiguel 0]

so can you do it tirefryr

[RodriguezMiguel 0]

so can you do it tirefryr

[Kanaworm$ 292]

Check out Alerion Enclosures here at SSA!

[shizzzon 461]

there are MANY box builders on this site.. go down into the vendor section and ask one of them.

You gotta at least categorize your posts.

[Hzd Skizzy 27]

Would be very nice to know what subs... at least the size..

[Tirefryr 1,742]

so can you do it tirefryr

I could, but you couldn't afford it.

[RodriguezMiguel 0]

it is for 2 dcon -10

[ricksi30 923]

Responding to pm now.

[ricksi30 923]

Can I ask why you want such a large sealed box? Also the fiberglass won't be worth the added cost in my opinion but can be done if you are set on doing it. Pm your vehicle, RMS power being used, and max dimensions.

Thanks, Rick

[Julian 641]

Why do you need someone to make a sealed box? A sealed box is the simplest enclosure you can do.

[RodriguezMiguel 0]

im just going by what a friend of mine told me

[ricksi30 923]

im just going by what a friend of mine told me

Well first question would be: Why sealed over ported? DCON's perform better ported in my opinion. It will be determined by what your goals are.

[RodriguezMiguel 0]

i mean what is the difference between ported and sealed ?

[S.DeYoung 968]

Have Rick build you a ported box built to spec. No fiberglass because it will add a lot of extra cost and doesn't matter unless you are competing.

[RodriguezMiguel 0]

i want sound quality then just bass

[S.DeYoung 968]

Well they are subwoofers so they are going to produce bass. If you box is built to SSA specs, it will sound great.

[RodriguezMiguel 0]

ok cool so ill jsut tell rick to build a box ssa spec

[Impious 1,476]

You will want those subs to be in a ported enclosure. Low end output will improve significantly.

[ricksi30 923]

You will want those subs to be in a ported enclosure. Low end output will improve significantly.

Exactly what we're going to do. Ported tuned to ~30hz.

[steveo50 3]

I'd also ask rick not tell (tell just seems rude)

[Tirefryr 1,742]

He's the customer, he gets what he wants. Not rude at all.

[ricksi30 923]

He's the customer, he gets what he wants. Not rude at all.

Yeah we will do whatever is requested, however in this case it was evident that some guidance was needed.

[RodriguezMiguel 0]

lol yea thanks rick