Jump to content
Sign in to follow this  
CBFryman

Well Braced Box

Recommended Posts

And it has 8" of clearance too, too bad you cant go any larger than 10's with it.

d57956cf.jpg

a3e5fcab.jpg

d6b0e89b.jpg

f33f73cd.jpg

3e10d84c.jpg

a4ae9b6a.jpg

Basically it ended up that i would just go around tapping it with a hammer and saying "it could use some bracing here" untill no matter where you tap it you get a short, high tap, not a thud. cant really brace any better than that. :domoslay:

its heavy as a Bizotch too for a 2cuft box, used almost an entire sheet of MDF

ca566e2a.jpg

Anyway, its on the smaller side for the speakers it was built for which are 2 Kicker Comp 10's but low end output should be made up for for the lower than reccomended tuning (about 32Hz uncorrected and 29-30 after end corrections) and they are slot loaded so im hoping that does something for it. its the port is massive, 3.5x6.5... its going int a single cab Ram 1500

Share this post


Link to post
Share on other sites
And it has 8" of clearance too, too bad you cant go any larger than 10's with it.

d57956cf.jpg

a3e5fcab.jpg

d6b0e89b.jpg

f33f73cd.jpg

3e10d84c.jpg

a4ae9b6a.jpg

Basically it ended up that i would just go around tapping it with a hammer and saying "it could use some bracing here" untill no matter where you tap it you get a short, high tap, not a thud. cant really brace any better than that.  :domoslay:

its heavy as a Bizotch too for a 2cuft box, used almost an entire sheet of MDF

ca566e2a.jpg

Anyway, its on the smaller side for the speakers it was built for which are 2 Kicker Comp 10's but low end output should be made up for for the lower than reccomended tuning (about 32Hz uncorrected and 29-30 after end corrections) and they are slot loaded so im hoping that does something for it. its the port is massive, 3.5x6.5... its going int a single cab Ram 1500

Lemans Jr.? Got enough CAULK?!?!

I would have use aero-ports...two 4"...would have made it a lot easier ;).

Oh well...good stuff.

NG

Share this post


Link to post
Share on other sites

Noah, you know me, i love Chaulk.... mmmMMMmmmgood.

Pics = Fixed

:)

I would have used Aero-ports but my friend is cheap and yeah...he told me i dont need to bondo the seems i just need to paint it...i was like "its like $5 for a small can of bondo, that is all i need." he finally agreed to give my the extra $5, lol. two $14 ports would have sent him through the roof.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×