6th and 4th order helppp.

[2Loud 0]

Ive been wanting a 6thorder for a while. I wanna try to build one for one of my sundown sa-15s i dont how big to make the chambers or the tuning. I listen to all rap and songs with low bass. Idk what do do someone help me. And what types of wood can i use?

[S.DeYoung 968]

Honestly I would pay for someone to design it for you. Ram_Designs and Bromo on SSA will help and are very good.

If you want to try to design it for yourself:

Fourth Order Bandpass

Sixth Order Bandpass

I would use MDF or Birch wood for the construction. Birch if you want to save weight. MDF if you want to save money. 3/4" either way.

[Kanaworm$ 292]

Ive been wanting a 6thorder for a while. I wanna try to build one for one of my sundown sa-15s i dont how big to make the chambers or the tuning. I listen to all rap and songs with low bass. Idk what do do someone help me. And what types of wood can i use?

Do you have the room to do such an enclosure in your vehichle? For just 1 15" subwoofer I would stick to doing a standard 4th order ported enclosure tuned to 30-32hz for your listening tastes.

[2Loud 0]

Lol i had a 7.3 cube box in my trunk before So im hoping i could fit one. Where can i get birch wood and what exactly is it?

[S.DeYoung 968]

Birch wood is found at home depot or lowes. I don't know what you are asking about what it is? It can be found near all the other wood.

[2Loud 0]

Birch wood is found at home depot or lowes. I don't know what you are asking about what it is? It can be found near all the other wood.

Ok. And u ment like what is the specific name for it but that was a dumb question lol

[///M5 2,833]

Just do a standard ported. If you are that far from being in the "know" the end result won't be as good. Trying something new is a horribly stupid reason for doing something unless you plan to do all the design work and are willing to build three+ different enclosures to compare so you can actually learn. Saying that another way, if the try is to learn then carry on. If its to try, then don't.

[duanebrow 6]

Birch wood is ply wood. But you can't get the cheap stuff. It is about $50 a sheet. I might be convinced to do a 6th order design... If you are serious about building it.

Duane

[jonbearsmt 919]

6th order is more or less a once note strong box no?

sorry to bring up an old topic.

[duanebrow 6]

You should just start a new topic.

It can be if you want, or don't do it right. They are very picky about getting everything correct. But they can have a flat response if done well.