strapping amps wiring confusion

[knockinthastreetzof608 1]

okay guys it sounds like a noob question which is probley is but im just trying to figure out what i am trying to see as a final impedence

i have 2 woofers with .7 coils

1.) if i wire it in series/parallel does that mean i get my amps at .35 each and .7 total? or does each amp get .7 and 1.4 total?

2.) if i wire it in just series does that mean my amps each will see close to 1.4 ohm each? and 2.8 total?

just getting lil confused on this

any help please

[Ohjay 116]

2 D.7 subs will wire down to a final load of .7 so if your amps are strapped, they will be wired to .35 each. Is this system for comps/burps? .35 is pretty low and you'll need a very strong electrical system in order to keep from damaging the amplifiers. Do you already have all the equipment (amp/subs)?

[knockinthastreetzof608 1]

yes i have everything , and yea i feel like i dont have that kind of elecrical to run that so you think if i just run it in series will be better for me i do go to comps but not often enough for me to to all , it is mostly a daily driver

[Ohjay 116]

Are you going to use a pair of AQ 3500s on a pair of DC XL 10s?

[knockinthastreetzof608 1]

correct, well i reconed them to 15 but that no difference just soft parts

[Ohjay 116]

each amp at 1.4 should be more than enough.

[knockinthastreetzof608 1]

http://www.the12volt.com/caraudio/woofer_configurations.asp?Q=2&I=12#results

so like the second diagram one below correct on how i wire the subs?

[Ohjay 116]

yes indeed

[knockinthastreetzof608 1]

yes indeed