how to go about wiring 2 zr240's.....

[SMpaintball78 58]

well i was bored again the other day so i threw 1 of my oldschool kicker zr240s on 1 of my solo x's. it doesnt sound to bad. i do however have a second zr240 in perfect working order. so how would i go about wiring both of them up and linking them? i want both amps to be pushing the 1 solo x.iv never done it before and help would be appreciated.

Thanks!

Edited September 16, 2011 by Lantz

[S.DeYoung 968]

Are those amps linkable/strappable?

[lithium 358]

also need to know what the coil config is for the sub.

[Jay-C76 333]

You could run one amp to one coil and the other to the opposite coil.

As long as the amps are 1 ohm stable.

Be very careful when doing this b/c you can get settings wrong and wind

up doing some damage to the coil.

Just back the volume off if you see, smell, or hear any signs of something wrong.

[cobra93 47]

Providing the zr won't get cranky with with the ohm load it see's, set both amps output with a DMM and test tone and hook one to each coil.