From: Brand new subs nearly no bass?

[Denven 0]

the ssf switch on rf mono amps is at 28hz when its on, i turned it off for now, lpf not sure where its set, kinda hard to tell where its set, i usally just set it low and turn it up while listening to a bass heavy song and stop where i feel its good. Will take the subs out tomorrow and tripple check the wiring again, and perhaps take a pic at the same time to show how its wired

Your crossover should be set at about 80hz, If it is turned all the way down you wont get much output.

think you misunderstod me, i set it all the way down and lisen to a song with low notes and slowly turn it up till it hit most of them. kinda hard to tell if its set on 80hz or not :S But i just may think its the box, i dont even know the specs on the box, got it for free as payment when i made someone a new box.

But building a new box next week. So i know how much cu feet it is and tuning.

Took the subwoofers out and tripple checked the wires every thing is wired correctly just like that MS paint drawing in the first post.